Steel Hangers

[jezzie]

I have been approached by some investors to build some hangers at a local airport here in Edmonton. I have found Erect-a-tube in Harvard Il. and another member suggested R&M Steel in Idaho. I have also seen a carousel type hanger in Fargo ND. If anyone has experience or any information please let me know. Thanks

Eldon

[Mooney65E]

I dealt with R&M years ago after weeding through several others. They seemed to have the overall best product for the price staffed with a team of professionals.  I'd also recommend having a bifold door installed where plans will allow. I enjoy pushing that button and watching that door slowly reveal my shiney bird.

[ray]

I live on 27az eagleroost airpark and there are probably 35-40 r&m steel hangers they are a good product. I have a Bunger steel building 50'x60' built in Phoenix Arizona almost same product only reason I bought from them is that they were local I would put out bid to both of these companys.

 

[KSMooniac]

If you're open to door suggestions, check out Hydroswing doors instead of sliding or bi-fold options...they seem to be the gold standard now.

http://www.hydroswing.com/

[jezzie]

Thank you for all your help, quotes for T-hangers are coming in slowly. I will be leaving in about 2 weeks and traveling by car from Edmonton to Oshkosh. Typically I cut across country to Minot ND, then over to Minneapolis then Oshkosh. If any one out there knows of any good hanger complexes that I can take a look at while enroute let me know. Even if it is some what off the normal route I would consider it. Of course I will de doing my due diligence while at Air Venture, I may be directed else where then. Our group is serious about providing a good product and service for the general aviation community in the Metro Edmonton area and subregional area. I envision a good mix of Corporate, GA, and Homebuilders facilities.

Thank you

Eldon