N601RX Posted July 23, 2012 Report Posted July 23, 2012 I found this brake line rubbing while doing some other work. They look original and the rubbing had been rubbing for a long time. It only rubbed with a full right rudder input. It is the line that goes from the right pilots side master cylinder up to the T. The Fuel line between the electric fuel pump and firewall had been rubbing on the pedal cross shaft also. It is not obvious that either of these would rub unless you apply a full rudder deflection while watching. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.