Endre Holen Posted January 19 Report Posted January 19 I am installing a Garmin autopilot and solid state HSI and DG so the vacuum system and servos are going out. I am trying to find if the vacuum for the step is on the same vacuum system or different?
MB65E Posted January 19 Report Posted January 19 It’s the same, it will no longer work if the VACC pump is removed. Older M20’s had a crank. One gentleman on the website here made his own electric step. I would install that with a simple log entry. -Matt
Ragsf15e Posted January 19 Report Posted January 19 42 minutes ago, MB65E said: It’s the same, it will no longer work if the VACC pump is removed. Older M20’s had a crank. One gentleman on the website here made his own electric step. I would install that with a simple log entry. -Matt You can buy an electric step conversion. Is it @takair that built those? 2
Hank Posted January 19 Report Posted January 19 1 minute ago, Ragsf15e said: You can buy an electric step conversion. Is it @takair that built those? That's who I was thinking. But my step is fixed. Should be another option for the earlier birds, too. 2
icurnmedic Posted January 19 Report Posted January 19 Had the electric step installed. Worked great and wasn’t too bad expensive. 2
Endre Holen Posted January 20 Author Report Posted January 20 Thank you all. I ripped out all of the vacuum hoses and servos. There is a lot of stuff there.. Ordered the electric step! 2
Recommended Posts