Marc_B Posted October 18, 2023 Report Posted October 18, 2023 What is the material in the exterior door handle seal? Does anyone have a source to replace the seal alone, outside of replacing the entire handle with seal?
N201MKTurbo Posted October 18, 2023 Report Posted October 18, 2023 Looks like the sponges my wife buys for the kitchen sink. 1 3
A64Pilot Posted October 20, 2023 Report Posted October 20, 2023 Use the sponge rubber that’s on the refrigerant lines for a house airconditioner? That stuff seems to last a long time. I didn’t know there was a seal there. 1
N201MKTurbo Posted October 21, 2023 Report Posted October 21, 2023 On 10/20/2023 at 7:46 AM, A64Pilot said: Use the sponge rubber that’s on the refrigerant lines for a house airconditioner? That stuff seems to last a long time. I didn’t know there was a seal there. I’m pretty sure that is neoprene. That would be a good choice. This is way to much, but the price is right. https://www.amazon.com/Sponge-Neoprene-Thick-54-Wide/dp/B001FZTO06 1
Marc_B Posted October 21, 2023 Author Report Posted October 21, 2023 @N201MKTurbo That's enough for 1 million Mooneys! ha ha. Probably neoprene would seal well too I would think. 1 2
carusoam Posted October 21, 2023 Report Posted October 21, 2023 Foam rated for outdoor UV protection is all that it would take… Material density dimensions fire resistant and best glue to use may make a call to Lasar a worthwhile endeavor… Automotive foams often have similar qualities… How much does the Mooney specific foam go for lately? Best regards, -a- 1
carusoam Posted October 21, 2023 Report Posted October 21, 2023 Also be looking for a seal inside the door… a split rubber sheet that allows the mechanism to slide may be hiding in there as well… PP thoughts only not a mechanic… Best regards, -a-
N201MKTurbo Posted October 21, 2023 Report Posted October 21, 2023 48 minutes ago, Marc_B said: @N201MKTurbo That's enough for 1 million Mooneys! ha ha. Probably neoprene would seal well too I would think. Actually 216 Mooneys.
PT20J Posted October 23, 2023 Report Posted October 23, 2023 BTW, it's not a seal. It's just a cushion. It's not critical and I haven't bothered to replace mine, though the handle is a bit recessed without it. You can replace it with any type of foam cut to fit. 1
Marc_B Posted October 23, 2023 Author Report Posted October 23, 2023 @PT20J That certainly makes more sense as it certainly doesn't seem to be sealing much, but having the handle in the right place makes it easier to lock/turn the key. 1
Marc_B Posted April 21 Author Report Posted April 21 Follow-up. The channel is 3/8” H x 1/2” wide. A 2.5” L piece of 1/2” x 1/2” neoprene foam fits well and stands a little proud of the edge after you let it expand completely after application. Inexpensive and looks like it came that way. The handle also sits correctly so the key locks easily without pulling out the handle a bit. 3
Gee Bee Aeroproducts Posted April 23 Report Posted April 23 Ensolite foam Foam Mart Burbank California You can order with psa adhesive on one side . 1
shawnd Posted April 23 Report Posted April 23 Thanks @Marc_B and @Gee Bee Aeroproducts, mine need replacement too. Here's the Foam Mart source for those you are interested: https://foammart.com/product/ensolite/ These guys, https://foamforyou.com/ensolite-foam?srsltid=AfmBOorKHBOTLw_VWnBWJRiLxiDlfYJNoLTYzd1UVSBOhK5UbXpPHOAX, have other colors for those who want to get the lighter colors.
Recommended Posts