drifter001 Posted July 12, 2023 Report Share Posted July 12, 2023 Howdy again looking for help finding a part number for the fuel strainer/gascolater gasket for my 65 m20E. Picture included for reference Quote Link to comment Share on other sites More sharing options...
Vance Harral Posted July 12, 2023 Report Share Posted July 12, 2023 If it's an H&E fuel selector, the part number is 940057-001. You can get them from LASAR: https://lasar.com/seals-gaskets/fuel-bowl-gasket-940057-001 Consider ordering a fresh stat-o-seal as well, https://lasar.com/seals-gaskets/lock-o-seal-600-0101-10. Strongly suggest you verify the exact fuel selector in your airplane, then call LASAR and ask for a seal kit for that unit. Which models have what selectors gets a little complicated. It's not guaranteed you have an H&E selector, you may have a Dukes. 1 Quote Link to comment Share on other sites More sharing options...
drifter001 Posted July 13, 2023 Author Report Share Posted July 13, 2023 6 hours ago, Vance Harral said: If it's an H&E fuel selector, the part number is 940057-001. You can get them from LASAR: https://lasar.com/seals-gaskets/fuel-bowl-gasket-940057-001 Consider ordering a fresh stat-o-seal as well, https://lasar.com/seals-gaskets/lock-o-seal-600-0101-10. Strongly suggest you verify the exact fuel selector in your airplane, then call LASAR and ask for a seal kit for that unit. Which models have what selectors gets a little complicated. It's not guaranteed you have an H&E selector, you may have a Dukes. Any idea how to tell which type it is? Would it be posted on the cover? Quote Link to comment Share on other sites More sharing options...
Vance Harral Posted July 13, 2023 Report Share Posted July 13, 2023 11 hours ago, drifter001 said: Any idea how to tell which type it is? Would it be posted on the cover? Should say so on the data plate, which I've circled in your photo below. Quote Link to comment Share on other sites More sharing options...
TPC Posted July 13, 2023 Report Share Posted July 13, 2023 Hi, I replaced mine with the below. Just ask for it to be made with 1/16" thickness. This topic was discussed in the years past. Just can't find the thread. Gasket Link: https://www.brownaircraft.com/Gascolater-Gasket-2in-OD-by-1-8in-p/gl-30-hd.htm 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.