Aspen MAX audio alerts stopped

[rbridges]

When I first had it upgraded, I got notifications through the audio panel.  I just realized I wasn't getting them anymore.  Is there a setting in the Aspen for the alerts, or is it something I need to reset in the audio panel?  btw, it's a 2500 MAX and PMA 450.  It's under warranty, but I'd rather not fly back to the shop if it's something I can check myself.

Thanks.

[carusoam]

Let’s see if @Mscheuer is cruising the neighborhood... he is our Audio panel expert for PSEngineering...

Best regards,

-a-

[BaldEagle]

21 hours ago, rbridges said:

When I first had it upgraded, I got notifications through the audio panel.  I just realized I wasn't getting them anymore.  Is there a setting in the Aspen for the alerts, or is it something I need to reset in the audio panel?  btw, it's a 2500 MAX and PMA 450.  It's under warranty, but I'd rather not fly back to the shop if it's something I can check myself.

Thanks.

I have a similar setup (EFD1000 Max and PMA450B).  I don’t think there is anything on the audio panel to check: the audio output from the Aspen is a wire from the back of the Aspen to the back of the audio tray and is always on.  You can check the volume setting for audio alerts on the Aspen by going into the Installer menu described on the bottom of page 135:

https://www.aircraftspruce.com/catalog/pdf/11-16466.pdf
 

I don’t think Aspen want their end customers poking around in here, but you can check and set your audio alerts output volume here, which is probably the first thing your avionics shop will do in any case.

[DXB]

38 minutes ago, BaldEagle said:

I don’t think Aspen want their end customers poking around in here, but you can check and set your audio alerts output volume here, which is probably the first thing your avionics shop will do in any case.

Agree - first check volume setting in configuration mode. That worked for me, but of course I could never hear it, rather than having heard it when I first got it installed.