jamesm Posted August 24, 2020 Report Posted August 24, 2020 Hi, I really appreciate all the support from the MooneySpace people, for all my off the wall questions last one for the month from me. I am curious to know if when using the DALT/TAS/Winds Calculator if other Garmin Units require User to input for the OAT (TAT) field manually or Does it enter automatically when you press "use senor data" button ? When I tried mine today it had all the data was automatically populated except TAT/ OAT field. I had my G5's setup as Fahrenheit Instead of Celsius not sure if that would make a difference. So Changed the G5's to display to read in Celsius, I will check it out the next time I go fly. Thanks in advance, James '67C Quote
Niko182 Posted August 24, 2020 Report Posted August 24, 2020 it enters it automatically when you press use sensor data. I have a G3X and a 375 but it should be the same. Quote
jamesm Posted August 24, 2020 Author Report Posted August 24, 2020 I will have to try again since I change the G5's to Degrees C. Thanks interesting to know. Quote
Ragsf15e Posted August 24, 2020 Report Posted August 24, 2020 Interesting, the temp data auto populates on my 430 there. There’s no button to push. I’m pretty sure it’s getting it from the jpi930 because that’s the only temp probe i have. Interestingly, my G5s are also hooked up to the 430w but don’t get the temp from the jpi and so don’t display density alt or tas. Garmin makes you put in another temp probe even though the 430 can already share temp from the jpi. A little weird in my opinion. Quote
jamesm Posted August 25, 2020 Author Report Posted August 25, 2020 I guess I was expecting the OAT from GAD 13 Temp data to be converted CAN signal and sent to GNC355 Via ARINC 429. Maybe I am missing a setting some where. Does the G3X use a GAD13 to convert OAT temperature into CAN data signal or Does G3X use some other AHRS/ADRU unit for the Pitot Static Temp conversion? Quote
carusoam Posted August 25, 2020 Report Posted August 25, 2020 22 hours ago, jamesm said: Hi, I really appreciate all the support from the MooneySpace people, for all my off the wall questions last one for the month from me. No fear... There is no limit for new guy questions... The more challenging the better... Best regards, -a- Quote
jlunseth Posted August 30, 2020 Report Posted August 30, 2020 Or for old guy questions either! 1 Quote
59Moonster Posted August 31, 2020 Report Posted August 31, 2020 What values are you trying to get? I think most of that data is already provided for you on the G5's. Quote
jamesm Posted September 1, 2020 Author Report Posted September 1, 2020 My comment was when I select "sensor data" button it doesn't transfer OAT/TAT data it has to manually entered. Not sure if there is setup selection that I missed or since my OAT/TAT is CAN data and since the GNC355 doesn't talk CAN. I am not sure how the OAT/TAT would be converted to A429 data other than GAD29B which transfers heading and indicate Alt, HDG to the GNC 355 but not OAT\TAT. James Quote
Baker Avionics Posted September 8, 2020 Report Posted September 8, 2020 On 8/31/2020 at 6:48 PM, jamesm said: My comment was when I select "sensor data" button it doesn't transfer OAT/TAT data it has to manually entered. Not sure if there is setup selection that I missed or since my OAT/TAT is CAN data and since the GNC355 doesn't talk CAN. I am not sure how the OAT/TAT would be converted to A429 data other than GAD29B which transfers heading and indicate Alt, HDG to the GNC 355 but not OAT\TAT. James Here is an excerpt from the G5 Manual in regards to the OAT info and how it gets transferred: The G5 is capable of sharing OAT information with navigators and transponders over the CAN bus, which is converted to ARINC 429 at the GAD 29/29B. 1 Quote
carusoam Posted September 10, 2020 Report Posted September 10, 2020 Great Garmin details, Greg! Thanks for sharing them... Best regards, -a- 1 Quote
jamesm Posted October 3, 2020 Author Report Posted October 3, 2020 Problem solve updated the G5's software V6.72 now works. thanks for the input. James 1 1 Quote
carusoam Posted October 4, 2020 Report Posted October 4, 2020 Great follow up, James! Thanks for taking the time... Best regards, -a- Quote
Gbkkp Posted July 4, 2021 Report Posted July 4, 2021 On 8/24/2020 at 3:00 AM, jamesm said: Hi, I really appreciate all the support from the MooneySpace people, for all my off the wall questions last one for the month from me. I am curious to know if when using the DALT/TAS/Winds Calculator if other Garmin Units require User to input for the OAT (TAT) field manually or Does it enter automatically when you press "use senor data" button ? When I tried mine today it had all the data was automatically populated except TAT/ OAT field. I had my G5's setup as Fahrenheit Instead of Celsius not sure if that would make a difference. So Changed the G5's to display to read in Celsius, I will check it out the next time I go fly. Thanks in advance, James '67C how did you change the G5 from F to C? Quote
ArtVandelay Posted July 4, 2021 Report Posted July 4, 2021 how did you change the G5 from F to C?Holding the button on power on gets you to the setup menus. Quote
Gbkkp Posted July 4, 2021 Report Posted July 4, 2021 5 hours ago, ArtVandelay said: Holding the button on power on gets you to the setup menus. I did but could not find a choice for temporary display and it’s not in the manual either;() Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.