Derrickearly Posted November 4, 2019 Author Report Posted November 4, 2019 1 hour ago, Marauder said: The largest challenge for these eyeball replacements is the 25 degree movement. You may need to modify the vent adapter to angle the eyeball to get the coverage you want. Looking forward to the final product. I was trying to keep it simple with a straight extension. I would have to add another set of screws, tapped holes and resolve the fastener interferences to rotate the plane. I could be over thinking this. I'm mostly looking to be able to close the vent to allow for maximum defrost on cold mornings. 1 Quote
Derrickearly Posted June 1, 2020 Author Report Posted June 1, 2020 (edited) Here is the final installation. You can order the eyeball vent from Spruce, and the adapter from xometry. Please see the pdf for the order details. https://www.aircraftspruce.com/catalog/appages/largealumavblack.php 1AB77-15002.pdf Edited June 1, 2020 by Derrickearly 2 Quote
carusoam Posted June 2, 2020 Report Posted June 2, 2020 Nice follow-up Derrick... The O uses a similar location for the vent air, closer to the floor... The Xometry part came out pretty nice... Best regards, -a- 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.