Jump to content

Recommended Posts

Posted

Just finished adding RPM, Map and OAT and piggy backing my JPI 450 to my JPI730.  Then went into Factory setting and change it to an 830.  The marvels of modern equipment always amazes this old dog.

Pritch

Picture0502171615_1.jpg

Posted
Just finished adding RPM, Map and OAT and piggy backing my JPI 450 to my JPI730.  Then went into Factory setting and change it to an 830.  The marvels of modern equipment always amazes this old dog.
Pritch
Picture0502171615_1.thumb.jpg.6374f83a3c6d38e387b090fd20cb65d0.jpg


Expand please. I have a 730 but did not know you could make it into an 830 just by changing a setting?


Sent from my iPad using Tapatalk
Posted

Hector, if you go into program mode and go all the way to the end (END?) then push and hold the step and LF buttons FACTORY SET.  Scroll through to JPI730 and hit change and it will change to JPI830.  I have added TIT, OAT, RPM, and MAP sensors, and made my own jumper cable from my JPI450 to add fuel flow, so now it also gives me % of HP.

Pritch

  • Like 1
Posted
Hector, if you go into program mode and go all the way to the end (END?) then push and hold the step and LF buttons FACTORY SET.  Scroll through to JPI730 and hit change and it will change to JPI830.  I have added TIT, OAT, RPM, and MAP sensors, and made my own jumper cable from my JPI450 to add fuel flow, so now it also gives me % of HP.
Pritch

Sweet! Thanks. I need to add RPM and MAP.


Sent from my iPad using Tapatalk
Posted

Hector, send me an email to supercub180@gmail.com.  I can help with the missing transducers and wiring to turn your 730 into an 830.  I can also help turn 700's into 830's, 830's into 900's etc.  Magic - just takes money.  Aerodon.

  • Like 3
Posted
4 hours ago, Aerodon said:

Hector, send me an email to supercub180@gmail.com.  I can help with the missing transducers and wiring to turn your 730 into an 830.  I can also help turn 700's into 830's, 830's into 900's etc.  Magic - just takes money.  Aerodon.

Now you have peaked my interest as I still need oil temp and pressure.

Pritch

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.