conom06d Posted August 11, 2010 Report Posted August 11, 2010 I have no idea what would cause it but some of you all may actually know what would cause it. I always have a HDG flag so i know it is not working right but it stays consistantly 30 degrees off of correct heading. If I unslave the HSI and align the heading to mag compass it will hold it accurately until I turn the plane off. In other words it does not precess. But if i press the slave button in it will go back to aligning with the incorrect 30* off heading. Any ideas? Quote
carusoam Posted August 11, 2010 Report Posted August 11, 2010 Conom06d, "Fortunately" There is a thread for this already. You will be looking for plugs undo / redo or service the magnetometer....or leave the system unslaved.... http://www.mooneyspace.com/index.cfm?mainaction=posts&forumid=3&threadid=1164 Best regards, -a- Quote
conom06d Posted August 11, 2010 Author Report Posted August 11, 2010 Oh thanks for the direction. Yeah i dont normally check the modern mooney sections as im in a '61 but most of my avionics would pass for a newer panel Quote
Royski Posted August 12, 2010 Report Posted August 12, 2010 Suggest you contact Bob Bramble at Aerolab - very experienced with these units and good prices. http://www.aerolabaviation.com/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.