Jump to content

milotron

Basic Member
 View Profile  See their activity

  • Posts

    759

  • Joined

  • Last visited

 Content Type 

Everything posted by milotron

  1. milotron
    Rare 'hole punch' clouds seen over Victoria area this morning. Snapped this dropping the plane off for maintenance. iain
  2. milotron
    How invasive is the inspection on the spar/hinge connection? Is this something worthwhile doing if you have not been the sole operator of the aircraft?
  3. milotron
    Ha! I HAVE one of those lights and a switch beside it. It just changes the color of the lights so far as I can tell as it does nothing else. Previous owner didn't know what it did either. Definitely does not change the Nav input to the HSI, nor the autopilot. I'll have my tech investigate this when the panel is open for the xponder install; now I am curious about it. iain
  4. milotron
    I have been considering the same thing. I have GNS430W that I was going to slip into Nav/Com 2 to replace a KX165 and put an IFD540 in position 1. The intent being to swap the Garmin to a 440 in the future. Like others have noted, the extra screens and current radio is nice, but not sure it is worth the extra costs. I am getting ADSB in/out installed end of the month and will see how the traffic looks on the small Garmin screen first. Has anybody setup a switch/relay scheme to allow using Nav 1 or Nav 2 to drive the autopilot or primary nav display?
  5. milotron
    Good read. What is the cause for the left mag on the TSIO360 being an ongoing issue; is it related to the vent hole being clogged? I see in my logs that the left mag has been serviced almost twice as much as the right. iain
  6. milotron
    What does a typical rebuild cost? A rebuild unit is $750CDN from Spruce.
  7. milotron
    They are the Slick 6324 pressurized. One was completely replaced previously, the other had some parts replaced. I'll look at the hours closer and aim for 500 hours with a stagger in the interval. thanks Clarence.
  8. milotron
    Good advice, I like it! I have electric standby AI which is all the pump drives so I will only lose the autopilot if it fails. I like the idea of staggering the mags; keeps one as a control sample at all times. iain
  9. milotron
    Howdy, Going in for annual this month and getting some preventative work done. What is the recommendation on mags? Rebuild; replace; service on condition? Engine is TSIO360MB in a M20K. No real ignition related issues noted with a lean mag check at altitude. They are at about 320 hours. How about vac pump? At 250 hours on that one. Thanks! iain
  10. milotron
    We had Cal on the Seattle cable channels in the 80's in Victoria BC. I remember it well. Thanks for putting that back in my head.... iain
  11. milotron
    Would you use a primer? Does the paint need to be compatible with the existing top coat? I do like the airbrush idea, I need to do this on my plane also. iain
  12. milotron
    I agree Dan. I got my copy in November and am very impressed. I wish it was around when I did my previous licensing as it is more complete than the other weather standards out there. The fact that it was signed by Doug makes it even better! iain
  13. milotron
    Aside from the clock buried in the AUX pages of the GNS430W, I actually have NO clock at all permanently mounted in my plane. So far a I can tell it has been like this since 1995 and has been airworthy and IFR certified since then and it lived in the US until 2014. The only timer is the flight timer in the ADF! Not sure that it is strictly enforced.
  14. milotron
    I suspect this is the case. The same reason the clock on your GPS doesn't count; you can switch away from it.
  15. milotron
    I asked them the same thing about the OAT indicator and they said something similar indicating that if the OAT was on the required equipment list, the AV-20 could not replace it. Seems to me that the Davtron devices doing clocks/timer/OAT/volts have approval for this? iain
  16. milotron
    That spruce part looks like the right cable. Don is right; don't bother with any other serial-to-usb adapter as the Keyspan seems to be the only one to work. I got tired of using the ancient old laptop to download and had my EDM700 converted to internal USB port when the display died. Works great. Hope that you can sort your engine issues/ iain
  17. milotron
    I have only had my K for 3 years now. I trained and plan to 'not' use them, but they are handy in a pinch for slam dunk approaches or when ATC forgets to clear you to descend. I look at them as another tool in the box. iain
  18. milotron
    On my older, electric 1000 series speed brakes, the arms can be manually moved with the power off. The clutches are not engaged when the power is off so no damage can occur. The newer ones ( 2000 series ) or vacuum models may be different. Just my experience, not saying that it is right...and I sometimes break more then I fix... iain
  19. milotron
    The J parts are mostly the same as K parts, aside from the side panels with the oxygen ports and levers. Their website notes them this way also, if I recall. I had great service with them for door panels and several smaller pieces for my K. iain
  20. milotron
    Thanks, @Marauder. Is this in the manual or STC or paperwork as an approved method? I want to make sure I can provide direction to my installer that he won't argue or have issue with. iain
  21. milotron
    I seem to recall something on another forum ( that I now cannot find ) about using a splitter on a single GPS antenna to support the Lynx and a navigator. Is this a real thing that is approved? iain
  22. milotron
    Hi, Does anyone know if the the Lynx 9000 can take a position source via data link from a navigator instead of using the internal GPS? I am looking to get one installed, but trying to avoid putting another GPS antenna on the roof. iain
  23. milotron
    262 owner here. Biggest differences I note between 252 and 262 are: 262 is 14V but CAN come with dual alternators. Exact same engine as the 252. 262 is aftermarket and makes FIKI impossible. I have a full TKS system that would be FIKI if on a 252. 262 has no opportunity to upgrade to Encore. 252 has more modern interior and curved windows. 252 has those cool inner gear doors iain
  24. milotron
    I am really looking forward to seeing this unit become available with the autopilot functions noted. Like the previous post notes, they will not be able to make enough of these if they pull this off.
  25. milotron
    Looks great! I see that you removed the KFC autopilot. What is your autopilot plans?
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.