Panel and Post Light Rheostat Specs?

[jkb458]

Does anyone have the specs (impedance range) of the rheostats used to control the panel lights and post lights on early E's?  The part numbers are listed below, but I've been unable to find any specification info on the web.

Panel Lights    919006-001

Post Lights      919006-501

 

Thanks in advance!!!

Jeff

[Guest Anonymous]

According to the '68-'69 parts manual:

Mooney 919006 -1 AND -501 are both an OHMITE H-8-F2-352A.  It is still available from OHMITE distributors.

Here is the part number breakout. LINK Selecting a Rheostat (PDF, 3.4MB) for more information:

 

H

Type = RHS/RHL (WireWound)

Watts = 25

Ohmic Range = 1.0-25K

Core =  open

Max Volts =  500

B (Depth Behind panel) Dimension  =  1.375/34.93 in/mm

D (Diameter Excluding Terminals) Dimension =  1.560/ 39.62 in/mm

C (Installation Radius) Dimension =  0.940/23.88 in/mm

Shaft Torque =  0.25-0.5 lb. in.

Rotations = 300°

8              8.0 Ohms

F              Flat on Shaft for Key

2              2/8  or one quarter inch maximum panel thickness

352          Type 352 “OFF” position  (Clockwise end from wire  view)

A             Off Detent (off of coil)

RFB

 

[jkb458]

Thanks!!!  That's exactly what I was looking for!!!

 

Thanks again,

Jeff

[MHemperly]

  On 1/21/2010 at 4:23 PM, jkb458 said:

Thanks!!!  That's exactly what I was looking for!!!

 

 

 

Thanks again,

 

Jeff

where did you end up ordering this from?

[jkb458]

  On 10/8/2015 at 5:45 PM, Mhemperly said:

where did you end up ordering this from?

Aircraft Spruce

http://www.aircraftspruce.com/catalog/elpages/rheostat.php

[MHemperly]

  On 10/13/2015 at 6:28 PM, jkb458 said:

Aircraft Spruce

http://www.aircraftspruce.com/catalog/elpages/rheostat.php

Expand  

Did this part work for you? Reason I ask is because these ones don't have the off position.