mgan Posted February 15 Report Posted February 15 I have a new Aerocruze 100 autopilot that I was days away from beginning install on when Dynon announced their autopilot approval. It comes with all parts and documentation. It comes with a modification drawing ready for DER signature if someone wants to install prior to dynon receiving new revised stc approval (see letter from Duncan below). Modifications have been made to the kit parts per the provided modification drawing to allow it to fit in a short body. It will come with full ownership/stc transfer to new owner which I have already coordinated with and agreed with Duncan to help facilitate. If you want to wait for the STC revision for install, Duncan expects new parts kits to be provided free of charge. (see letter from Duncan below) looking for $5000obo Notice from Duncan: AeroCruze 100 Autopilot for Mooney Aircraft Update as of February 2026: Approximately Mid-Summer 2026 Bendix/King (Honeywell) ODA will be reviewing "Revised Drawings and Revised Installation Instructions" with the intent to include as additional FAA approved data for the current STC. This additional data, is considered a Minor STC Revision, and once approved (sometime late summer 2026), Bendix/King (Honeywell) will be working with their supplier's to fabricate "Redesigned Parts" and "Additional Parts" [i.e. added pitch servo push-rod of shorter length {for short body Mooney} and multiple pitch servo to fuselage mounting brackets {for medium body Mooney}] which are additional unique parts not currently in the STC Kits. Mooney owners who have bought the current STC Kits, but not yet installed - should be able to obtain these Additional Parts; we are assuming free of charge (when these newly designed & fabricated parts are available).
CL605 Posted February 15 Report Posted February 15 Interested. I'll see if I can figure out how to PM you.
LANCECASPER Posted February 19 Report Posted February 19 On 2/14/2026 at 11:10 PM, CL605 said: Interested. I'll see if I can figure out how to PM you. If you quote his post (like I did yours) or ping him @mgan (like I did ) he will get a notification
Recommended Posts