Schllc Posted February 15 Author Report Posted February 15 PREP Prop has been installed! Unfortunately the wiring harness for the surefly did not arrive so I didn’t get the electronic ignition installed. But there was plenty more to do. In this visit with Brian K we got a good amount done. 1. Installed new prop and spinner. 2. Changed all exterior lighting to LED. 3. Two new magnetos and timing adjusted. 4. Chafe tape on cowling replaced. 5. Rerigged landing gear for door adjustments. 6. Flap actuator adjustment for correct position indications. 7. Bled and changed brake fluid. 8. Changed all landing gear pucks. 9. Installed bob fields inflatable door seal. 10. Changed landing light lenses. I almost wish that I had flown the plane with just the prop and done the door seal later. Both of these items were done for noise reduction, and both appear to have made a significant difference. The flight back from Texas was almost 5 decibels quieter which is an enormous improvement. the prop on the ground sounds really different, but the noise in cruise is extremely quiet. The prop response is much quicker and while the advertised weight savings of 28# is a flat out lie, there was an actual 18# weight saving which makes a pretty big difference in landing. I also notice that the elevator is about 1/2” less deflection in cruise and it appears to be about 3kts faster in cruise. The lower cowling is a little more difficult to remove and replace, but still easier than an ovation, and I can still do it alone. The TKS slinger ring is also a MUCH design than the hartzell and works much better. I am very happy with the prop and am thoroughly enjoying the restoration process. I will make a separate post regarding the door seal install, for any of those interested in installing. I believe after doing one, I could do it over again in less than 3 hours. It is incredibly simple once you know the shortcuts. Coming items…. updated fuel caps to new style. surefly mag install. new glass all the way around. New interior reseal of tanks new landing gear doors on right side. brake system overhaul. new paint. pending/contemplating type S conversion. corrosion X treatment. motor mounts. new panel cutout to install 275 in center and push mfd over. earthX batteries 3 Quote
exM20K Posted February 16 Report Posted February 16 The 4 blade prop and matte black spinner are badass. Can you spin the MT prop @ 2700 rpm for the 310HP jailbreak? -dan Quote
Schllc Posted February 16 Author Report Posted February 16 14 hours ago, exM20K said: The 4 blade prop and matte black spinner are badass. Can you spin the MT prop @ 2700 rpm for the 310HP jailbreak? -dan Yes, it is capable of 2700rpm. Quote
dkkim73 Posted February 16 Report Posted February 16 That is a very interesting idea to which you allude with the panel: Replacing backups with a GI-275 in the center. It's funny I always hear about the STC limitation with the G1000 but I rarely hear about big panel mods. Someone theorized that you might be able to cross feed data between the 275 and the G1000, and get better communication with other Garmin devices that way. (I know Lance is looking at a more direct flightstream based mod right now...) You could also drop a second unit in HSI mode underneath and get a more full featured backup set... You also probably know this, but if you put in a Garmin USB plug you can also use that for updates. Looks like it's shaping up as a really custom plane. Vaguely envious of your slight aft CG. 1 Quote
Danb Posted February 16 Report Posted February 16 Ray it is badass, I’d love to know the difference the four blade makes, you’ll end up with the nastiest Acclaim around. It’ll look fast just sitting on the ramp. We need a turbo or all Mooney flyin somewhere some weekend. Be cool to see 40-50 badass planes sitting together. 1 Quote
Schllc Posted February 17 Author Report Posted February 17 The only difference in sound is on the ground it whistles a little and sounds choppier than the three blade. In cruise the noise isn’t very different, except it is quieter. Not sure how much is the door seal and how much is prop. Quote
Schllc Posted February 17 Author Report Posted February 17 9 hours ago, dkkim73 said: That is a very interesting idea to which you allude with the panel: Replacing backups with a GI-275 in the center. It's funny I always hear about the STC limitation with the G1000 but I rarely hear about big panel mods. Someone theorized that you might be able to cross feed data between the 275 and the G1000, and get better communication with other Garmin devices that way. (I know Lance is looking at a more direct flightstream based mod right now...) You could also drop a second unit in HSI mode underneath and get a more full featured backup set... You also probably know this, but if you put in a Garmin USB plug you can also use that for updates. Looks like it's shaping up as a really custom plane. Vaguely envious of your slight aft CG. Im pretty sure it doesn’t cross talk to the AP or EIS at all. Maybe the transponder. I just think it’s a more practical location in your were to ever need it… it’s a lot of work, that doesn’t really add value and questionable necessity. It would look cool and I don’t suspect the mfd is that much harder to reach in our planes. Quote
exM20K Posted February 17 Report Posted February 17 1 minute ago, Schllc said: I just think it’s a more practical location in your were to ever need it… Yeah, the Mooney backup gauges are not in a good location. The best I’ve experienced is in the Diamond G1000 planes: right across the top. The big scimitar MT prop on the DA40 XLS also whistles. I always thought it was cool. -dan Quote
Schllc Posted February 17 Author Report Posted February 17 It isn’t an unpleasant sound at all. I think any time your plane sounds different it seems acute at first. The da42 and the diamond star also whistl, and both had mt props. Quote
Danb Posted February 17 Report Posted February 17 Ray when you get a chance send a pix of the panel addition D Quote
Schllc Posted February 20 Author Report Posted February 20 On 2/16/2025 at 12:18 PM, Danb said: Ray it is badass, I’d love to know the difference the four blade makes, you’ll end up with the nastiest Acclaim around. It’ll look fast just sitting on the ramp. We need a turbo or all Mooney flyin somewhere some weekend. Be cool to see 40-50 badass planes sitting together. I would love to see a deck full of turbo mooney’s! Quote
Schllc Posted February 20 Author Report Posted February 20 On 2/17/2025 at 5:52 AM, Danb said: Ray when you get a chance send a pix of the panel addition D No time frame on when/if that will be done. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.