robert7467 Posted September 22, 2020 Report Posted September 22, 2020 Anyone know what would cause this when I try selecting GPS? ILS lockout is disabled. I cant seem to get the deviation bar/gps selection to stick. However, I can get the GPS bearing pointer. Sandel 3308 KX 165 Garmin 420 GPS 20200921_150918 (1).mp4
carusoam Posted September 23, 2020 Report Posted September 23, 2020 What GPS do you have supplying the data? It may be a GPS setting that needs to be selected... or data to be delivered to the display... for something like a G530W... it has a VOR receiver, an ILS, And vertical guidance via GPS... three separate receivers in a box... If it isn’t a WAAS GPS, it doesn’t have vertical guidance to deliver... Best regards, -a-
robert7467 Posted September 23, 2020 Author Report Posted September 23, 2020 It's a 420, like a 430 without the nav. I am sure its just a setting somewhere.
mike_elliott Posted September 23, 2020 Report Posted September 23, 2020 Have you recently added the GPS and does it have WAAS? If so, your Sandel may need a firmware upgrade to support WAAS 1
robert7467 Posted September 23, 2020 Author Report Posted September 23, 2020 No wass.. This is a new install that I am trying to work out all the gremlins on.
carusoam Posted February 20, 2021 Report Posted February 20, 2021 Message for @robert7467 above... -a-
Gary0747 Posted February 21, 2021 Report Posted February 21, 2021 To get the deviation bar to show on th Sandel sn3308 you have to have the map settings turned off.
Recommended Posts