Sabremech Posted July 20 Report Posted July 20 9 hours ago, hammdo said: I’m sure I would… -Don I’m at OSH now and here through Saturday. Wouldn’t miss it as I’ve been going 23 years now, but I’m only 2 hours drive from Aviation Mecca! You might not want to come Don as it drains your wallet! David 1
Matthew P Posted July 21 Report Posted July 21 On 1/31/2021 at 10:18 PM, hammdo said: Flew her again today - gusty crosswind practice. I’ll post pic of where I’m putting my iPad mini now (co-pilots side of the windshield). I go for my 3rd class medical again tomorrow (have to do the whole thing every year now). I passed all the required test so hopefully it’s just a formality with the AME... -Don Why not just go Basic Med then you don't have to worry about it? 1
hammdo Posted July 21 Author Report Posted July 21 I am, later in the thread i note that… Thanks! -Don
hammdo Posted August 8 Author Report Posted August 8 Oil report came back. Looking way better! Chrome a little higher but I’m told by Blackstone that is normal for Millennium cylinders. Metal is way, way down and should get better in succeeding reports as I put more hours on engine. At the time of oil change. ~30 tach hours on the engine. Running great… -Don 3
hammdo Posted September 12 Author Report Posted September 12 Monday she goes in for the AeroCruze! Getting everything ready. Last days of no autopilot! -Don 2
DRH4249 Posted September 12 Report Posted September 12 Interested to hear you opinion on install and function.
hammdo Posted September 15 Author Report Posted September 15 Dropped off this morning. Went over everything with the shop. Excited to see how it all comes together! 1
hammdo Posted September 19 Author Report Posted September 19 Things moving along! Shop found a discrepancy in the roll servo arm length, needed to be shortened on my bird. Minor modification thankfully. I’ll be heading out Monday for a review and were adding a second cigarette light socket for additional power for future items I may want to power up. Excited to see the panel update for the flat pack… -Don 1
hammdo Posted September 22 Author Report Posted September 22 AeroCruze 100 Install PICS! Moving right along. We discussed the changes today -- cnc'ing the rod length etc for both pitch and roll. Install looks great so far. Decided to do a new Pilot's side panel and cover it with the 3M Carbon Fiber to make it all look the same. This will allow the shop to organize and not deal with previous 'holes' that were covered over. Hardware is about finished for install -- wire is being run. Gonna look nice once completed! -Don 3
hammdo Posted September 29 Author Report Posted September 29 New panel cut! Hardware and wiring about done! Waiting for the Carbon Fiber overlay and hook up! -Don 2
hammdo Posted Tuesday at 04:24 PM Author Report Posted Tuesday at 04:24 PM Carbon fiber overlay! Recessed the G5s too… 2
gwav8or Posted Tuesday at 04:55 PM Report Posted Tuesday at 04:55 PM 30 minutes ago, hammdo said: Carbon fiber overlay! Recessed the G5s too… Looks great! You'll like the recessed G5s. 1
Recommended Posts