N9428V Posted March 30, 2020 Report Posted March 30, 2020 I’m going back to a 2 blade prop. A trade has been made for a 2 blade prop from a piper. But I don’t think the spinners are the same. So I need a J model 2 blade spinner and back plate. Thanks in advance. N9428V
carusoam Posted March 30, 2020 Report Posted March 30, 2020 MS has a prop guy... and a couple of Mooney parts sellers... Let’s start with our prop guy... @Cody Stallings then hit our used parts guys.. @Alan Fox @SheryLoewen @Jerry Pressley -a-
OR75 Posted March 31, 2020 Report Posted March 31, 2020 (edited) I did not think you could just swap props from piper to mooney that simply for certified or maybe it happens to be the exact same prop based on the TCDS ? May depend on the S/N of the J you have. If it is a J .... Edited March 31, 2020 by OR75
Chris newton Posted May 21, 2020 Report Posted May 21, 2020 I have a spinner but not the backing plate if that helps any
FloridaMan Posted May 24, 2020 Report Posted May 24, 2020 If it's a Hartzell and not a McCauley, get the spinner assembly from Hartzell. Using the Mooney part will cost you more money and aggravation in the long run.
Recommended Posts