67 m20F chump Posted March 18, 2019 Report Posted March 18, 2019 Does anyone know what the seal is for the screen on the fuel selector? For that matter a picture of the fuel selector and it’s o-rings would be nice to have too. I want to have parts in hand for my annual. Thanks! Quote
Prior owner Posted March 18, 2019 Report Posted March 18, 2019 Here are two types, I believe. Take a picture of yours and call LASAR for the correct parts. Quote
DGates Posted March 18, 2019 Report Posted March 18, 2019 16 minutes ago, 67 m20F chump said: Does anyone know what the seal is for the screen on the fuel selector? For that matter a picture of the fuel selector and it’s o-rings would be nice to have too. I want to have parts in hand for my annual. Thanks! There are two gaskets on my 65 M20C. One is a fancy-Dan washer with a rubber gasket on the ID ... happen to have one in hand so I’ll post a picture. The 2nd gasket is for the sump bowl and it’s a Mooney part. Lasar was back ordered until today and they want $45 bucks for it, ouch. They should have them in stock now. Quote
DGates Posted March 18, 2019 Report Posted March 18, 2019 If you have an F model it might be different.... send pix to Lasar Quote
carusoam Posted March 19, 2019 Report Posted March 19, 2019 65 and newer... were the modern version, 64 and older were the ancient and glass bowl era... Pp thoughts only... Best regards, -a- Quote
Yetti Posted March 19, 2019 Report Posted March 19, 2019 Be aware there is a SB on the torque value on the bottom bolt. IT's lower than what is printed on some. Quote
N201MKTurbo Posted March 19, 2019 Report Posted March 19, 2019 The fancy washer is called a Stat-O-Seal. There are a few companies that make them and change the name a bit. It looks like the invoice above had it as Lock-O-Seal. Search these names and you will find the fancy washer. Quote
N201MKTurbo Posted March 19, 2019 Report Posted March 19, 2019 As far as the $45 gasket is concerned, I have been fixing up a 1951 M38 Jeep lately. I’ve gotten pretty good at cutting out gaskets with a scissors. just saying.... Quote
Marauder Posted March 19, 2019 Report Posted March 19, 2019 Does anyone know what the seal is for the screen on the fuel selector? For that matter a picture of the fuel selector and it’s o-rings would be nice to have too. I want to have parts in hand for my annual. Thanks! As mentioned there are several different types of fuel selector/fuel sump units installed on our Mooneys. When you call Lasar, ask for Dan. There is a new guy there who has messed up a couple of seal orders for me.The part depicted in the picture below is called a Stat-O-Seal. May or may not be in your kit. Sent from my iPad using Tapatalk Pro Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.