Rmollenkamp Posted July 29, 2018 Report Posted July 29, 2018 Is the exhaust still available? If so, I'd like to buy it.
Raptor05121 Posted July 30, 2018 Report Posted July 30, 2018 On 7/16/2018 at 7:46 AM, Alan Fox said: Yes it did , I have three in stock , Call me at 856 419 5209 Just saw this. I'll give you a call my next day off
Little Runaway Posted August 6, 2018 Report Posted August 6, 2018 Is the pitot tube still available? thanks, Aaron
Alan Fox Posted August 7, 2018 Author Report Posted August 7, 2018 On 7/29/2018 at 10:10 AM, Rmollenkamp said: Is the exhaust still available? If so, I'd like to buy it. yes
DaV8or Posted August 7, 2018 Report Posted August 7, 2018 Does it have a retractable step fairing in good condition? It's the little sheet metal part that screws onto the bottom of the step to close the hole when it's retracted.
Don Bishop Posted August 21, 2018 Report Posted August 21, 2018 (edited) If the door slide (steward) is operational, I would be interested in it. How much? Edited August 21, 2018 by Don Bishop
carusoam Posted August 22, 2018 Report Posted August 22, 2018 Welcome aboard, Don... @Alan Fox is around here somewhere... Best regards, -a-
Alan Fox Posted August 22, 2018 Author Report Posted August 22, 2018 On 8/6/2018 at 10:42 PM, DaV8or said: Does it have a retractable step fairing in good condition? It's the little sheet metal part that screws onto the bottom of the step to close the hole when it's retracted. sorry ,no step
Alan Fox Posted August 22, 2018 Author Report Posted August 22, 2018 12 hours ago, Don Bishop said: If the door slide (steward) is operational, I would be interested in it. How much? 100.00
Aniz Posted September 10, 2018 Report Posted September 10, 2018 Alan, If shoulder harnesses are still available. How much would you want for it?
carusoam Posted September 10, 2018 Report Posted September 10, 2018 Welcome aboard Aniz! best regards, -a- 1
FastTex Posted September 10, 2018 Report Posted September 10, 2018 (edited) @Alan Fox do you still have the glare shields? Still interested... Also, do you have the baggage door slider (if operational)? Edited September 10, 2018 by FastTex
Alan Fox Posted September 10, 2018 Author Report Posted September 10, 2018 5 hours ago, FastTex said: @Alan Fox do you still have the glare shields? Still interested... Also, do you have the baggage door slider (if operational)? Have some J and c glare shields , Door slider was sold , Best to call me at 856 419 5209 Thanx..
Aniz Posted September 11, 2018 Report Posted September 11, 2018 On 9/9/2018 at 6:23 PM, carusoam said: Welcome aboard Aniz! best regards, -a- Thank you Sr!
Aniz Posted September 15, 2018 Report Posted September 15, 2018 Turn/bank coordinator?what size/model?
Alan Fox Posted September 16, 2018 Author Report Posted September 16, 2018 12 hours ago, CWM20f said: Any Shaw 431-9 fuel caps. Price? Will check , good caps are 100 each
CWM20f Posted September 16, 2018 Report Posted September 16, 2018 29 minutes ago, Alan Fox said: Will check , good caps are 100 each Ok. I’ll take it if you have it. Does anyone know if parts are available - specifically the threaded shaft that goes through center?
Alan Fox Posted September 26, 2018 Author Report Posted September 26, 2018 Engine is sold , Prop is sold , Nose gear is sold , Nose gear doors are sold , windshield is sold , Belly skins are sold , Door prop is sold , Governor is sold ,
Aniz Posted October 3, 2018 Report Posted October 3, 2018 (edited) Shoulder harness? Edited October 3, 2018 by Aniz
Guest Spike Kavalench Posted October 3, 2018 Report Posted October 3, 2018 Throttle cable ever been replaced? How many hours on it? Know where to find a new one? I’m striking out everywhere.
Bob_Belville Posted October 3, 2018 Report Posted October 3, 2018 22 minutes ago, Spike Kavalench said: Throttle cable ever been replaced? How many hours on it? Know where to find a new one? I’m striking out everywhere. Order control cables through a MSC or direct from McFarlane. https://www.mcfarlaneaviation.com/section/services/custom-engine-controls/
Mooneymite Posted October 3, 2018 Report Posted October 3, 2018 ? No one else seem to use carb heat, but I word the knob out. I just need one.
Recommended Posts