kortopates

If you visit the facility their or If you had asked me before I left China I could have brought one out. But its very expensive to ship things between US and China. Best chance would be when a few of them are coming over here to bring one. I sent a small package USPS International Priority with 2 week service which was $67. The 3 week service is $57 which is the cheapest service I know of.

You are so right! Thanks for posting this Drew. Do we have your permission to use it?

Anthony, I believe they do from a second hand perspective. A couple of them went to Oshkosh the year Mooney returned as well. They have also translated Al Mooney's Story book into Chinese. In fact it looks like its back in print in Chinese there They are very aware of the Mooney culture and passion from the many stories they hear. They have named their first Chinese Mooney too - "Zhenghou #1" Paul

Thanks very much Jack, great photo! I'll pass it on. Sent from my iPhone using Tapatalk

This is a very unusual request, but one I hope many of you will be pleased to participate in. As some of you are aware I've been flying for Mooney in China the past several months and thus working with the China based Mooney team. They have some folks there that are working to promote the Mooney brand in China. One of the things they will be doing is developing some marketing literature and they would like to feature pictures of members of the proud Mooney family with their Mooney's - in other words you all! Because Mooneyspace already has the perfect medium to get such material, I encouraged them to go through the online Gallery's and pick examples of what they would like to use. Thanks to Mooneyspace this is much easier than asking people to submit pictures through the MAPA List or Aviating.com list. Also you may or may not be surprised to know they are just as interested in all M20 Mooney's from Vintage to Modern even though only new Mooney's will be sold in China. For one thing it shows off the rich heritage of the Mooney brand as well how well 50+ year old Mooneys are still flying today. They have made a first pass of whats already loaded up on Mooneyspace and picked about 10 pictures for starters. So I will PM each of the posters of the images that were initially selected and ask you for your permission to use them. Then I will pass back your response to them. If the submitter was different from the person in the picture I anticipate I may need help in realizing that and contacting the person in the picture - we'll see how you respond. Realize I did not take part in the initial selection. Anyway, I wanted to post this publicly so that my PM's doesn't surprise anyone. Thanks

Invulnerability, one of the 5 dangerous attitudes, is just as bad as the Macho attitude and all the others. Just say'in...

The air filter shown is for the -MBs and -SB's of the 252 & Encore - not an earlier 231. Not sure, but I assume they make one for the 231's too.

Looks like your AS is reading 124, not 128 and your baro setting is wrong on the 430, it should be 30.19, not 29.92, that will effect the DA. A error of the OAT of +2 degrees means your TAS would be 1/2 knot too high. With those corrections I calculate your TAS to be 143K What Teejay says above. Also I find without accurate heading information that method doesn't work out too well; especially using s compass. You can apply your compass card deviation to help minimize the error- which I did not see? Also, if that suction gauge is still working I'd check the vacuum unless you already know it's reading very high. 4.5" is what you want to improve longevity of your air instruments. Sent from my iPhone using Tapatalk

Not unusual at all. You are describing a weak battery and it will be obvious by the high amperage charging load after startup. Get to know what this is normally with a good battery and don't rush to take off when you see this. if the load doesn't come down right away you are much better off shutting down and putting a charger on it. Plus you're alternator/generator will last much longer. Its also a huge false of sense of security flying your bird with a dead battery because you think you can get away with it with because the generator will still work. Of course the plane is still un-airworthy with a battery with less than at least 80% of its rated capacity since it will do you little good if you loose your generator or alternator.

Certainly not an issue with the Vintage Mooneys through the J's and won;t be an issue in the K's if your not aggressively slipping with full flaps either. After all, If you are landing with a strong cross wind we shouldn't be using full flaps while also side slipping to the landing because of the excessive descent rate we'll get with both full flaps and the forward slip. I have never experience wing buffet with partial flaps in my K but I also don't spend much time in the side slip instead preferring to kick into it during the flair which is also the recommended method in Mooney's latest longbody Mooney's. Bob K even says there is no danger here but some buffet as long as you are ice free (since ice will lead to accelerated airflow separation leading to a full tail stall) but he also emphasizes this is no place to be in the Mooney (slow, full flaps and in an aggressive slip) nor is there any needs to be there. Often we hear at MAPA PPP's, pilots that have heard of this interpret it as one should never slip their Mooney on landing. A rather exaggerated response IMHO that robs the pilot of a valuable tool.

This looks very likely to be a skidding stall since I'd bet almost anything it wasn't a slipping stall and surely not a coordinated stall. Reportedly the pilot survived this too which we all know is rare in these events. Sent from my iPhone using Tapatalk

Thanks for sharing. But thank goodness I fly a fast Mooney that knows no borders! I'll just deviate a few states south and into Mexico. Should only add another 15 minutes!! [emoji846][emoji846] Lol's Sent from my iPhone using Tapatalk

It's actually different interface with Tapatalk but I found and corrected both instances. Thanks! Sent from my iPhone using Tapatalk

Mine is installed in the footwell vent, looks like easiest place to put it. Although it is the easiest place to install it, most will be dissatisfied with the loss of accuracy doing so since it's too close to the engine and exhaust. Notice were your OEM OAT probe is installed in order to be accurate. It gets undisturbed air out on the wing. Sent from my iPhone using Tapatalk

Thanks great explanation- But I Think you mean to say "slipping" and not "skidding" in the statements above? Oops - yes, I meant slipping turn. I'll try and correct that so as not to confuse everyone. Thanks. Sent from my iPhone using Tapatalk

Of course that totally depends on whom you would be seeing it with! [emoji846][emoji846] Sent from my iPhone using Tapatalk

No, that's not correct. A slipping stall still results in an incipient spin. It's just that the incipient spin rolls you toward wings level instead of away from wings level. Therefore, application of prompt recovery technique results in you breaking the stall about the time the wings are level with the horizon, This makes it easier/faster to level the wings with the rudder, and you don't lose as much altitude. But if you don't apply prompt recovery technique, you'll continue the outside snap roll and wind up in a spin opposite the direction you would spin from a skidding turn. Here's a video that shows a one turn spin from a slipping turn. The airplane snap rolls left, away from the right turn: This is only true with power in a positive attitude. The fact is you can't make such statements about a slipping turn without inclusion of power as to the configuration. At idle in a descending turn, such as our traffic pattern, a stalling slipping turn is mostly benign with the high wing un-stalling as it falls level. In fact in many trainers you can't even get it into a full stall. This is all in a huge contrast to skidding turns where both power on and power off you will be in for a big e-ticket ride down. But the aforementioned thought that any cross controlled stall will lead to a spin is utterly false and leads way to many pilots to being afraid of slipping their aircraft in the pattern. Sent from my iPhone using Tapatalk

Of course both would be newer airframes, the Ovation would be a downgrade with respect to performance at altitude and the Bravo will burn up a lot more fuel its 20 extra knots or so. They certainly both have their sweat spots, but the 252/Encore is the sweet spot in high altitude economy/efficiency . Sent from my iPhone using Tapatalk

Not exactly true that all cross controlled stalls will result in a spin. For example, there is huge difference between a stalling in a skidding turn versus in a slipping turn; especially at near idle power. But no, I have no intention of stalling a Mooney in a skidding turn!! Sent from my iPhone using Tapatalk

Started sooner!!!! Why are you still procrastinating??? [emoji45][emoji846] Sent from my iPhone using Tapatalk

Thanks Don, no worries at all.

I am at Gillespie and also a past MAPA PPP instructor. I am not Chuck, but I was trained by him and follow his methodology. I won't be available till the end of the month though since I am currently working for Mooney Intl in China.

I agree with Dallas. Plus you mention only that the seller has had work done by CrownAir, not that CrownAir has been doing the planes annuals. There is a huge difference. I would only be looking for a shop or set of eyes that was different from whom was signing off the last annual or two. Also that could be an advantage of using Savvy too if that appeals too you since Savvy will start with a review of the logs to determine the scope of the recommended PPI.

As Lance said, your only option is the LB. Given the Merlyn and Intercooler I would suggest not going with a factory engine when the time comes - although you are likely far from that day. But instead, I would recommend going with a good engine rebuilder that will build it up with the Merlyn and Intercooler. Otherwise it will will cost you a bundle to re-add the Merlyn and intercooler after the otherwise complete factory engine arrives. Plus I wonder if that will negatively affect your CMI Warranty so you should discuss your plans to modify the engine with them to find out - remember neither of those parts are approved by CMI. As it is you will want to talk to both engine rebuilders as well as CMI since you are in a rather unique situation going from the GB to LB. The change requires an all new induction tubes, pump and fuel servo as I recall properly plus some other items - those parts are likely to add significantly so you'll want to find out who can do that in the most affordable fashion and how (new or used parts); then add in your need to include your Merlyn and intercooler and see how it all totals out. But if you are really buying this as if it has a run out GB engine you'll be fine, but additional details suggest its far from run out with a recent top (depending on how it was topped). One suggestion. If this is your first aircraft purchase I suggest looking into Savvy's pre-purchase inspection. Savvy will give you just the right amount of guidance and advice that should ensure all the bases are covered to avoid any big surprises after purchase. I work for Savvy. One of our account managers, Ryan is also with Western Skyways, one of the country's biggest engine rebuilders, and i am sure he could give you good advice on your engine rebuilding options down the road as well. You may be perfectly happy with the 231, but when I went down that path many years ago, i was very happy to be able to upgrade to the 252 a year later to get a real turbo installation that really performed in the flight levels and was also greatly cleaned up from the 231. Plus it has the option of upgrading to the Encore for the 230 lb gross weight increase as I have been doing to mine. I certainly don't mean to knock the 231's, not at all, and most get by just fine; but the 252 is a huge improvement and worth waiting for if need be. Yet they are rare. Either way I wish you the best of luck with whatever you get.

There is really no such thing as a "rebuild" there is a 500 hr inspection which is an IRAN that if sent to a mag specialty repair station will include replacing all seals and virtually all moving parts and re-magnetizing the rotor, re-painting etc. Done in the field you'll generally get very little done because there is no specified list of replacement parts for the 500 hr IRAN; maybe just new points. So choose wisely who you use. The convenience of using your shop for the annual may not be the best option for your mags. The other option is an overhaul which isn't required till the engine is overhauled and then all parts listed by the manufacturer must be replaced. If you fly with pressurized mags take the 500 hr inspection very seriously; especially if you fly much IFR which the typical pressurized mag pilot does. Sent from my iPhone using Tapatalk