0TreeLemur

I trade a lot of stuff here, eBay, and other sites. When dealing with members of the aviation community I have not yet had a problem (knock on skull). Some folks procrastinate. Then something comes up. Tight money, health issue, you name it. Communication solves that problem to the extent that it avoids anyone getting angry. Some folks procrastinate then guilt sets in... Then one of two things happens- the guilt makes them pay, or they cope with it by pretending it never happened. I'm no psychiatrist, but it happens. Shame doesn't help in this case I'm afraid. That person has already decided to ignore the problem. I'd suggest that persistent reminders is the way to go. The only other alternative involves attorneys and all the invoices they create. Good luck.

Thanks Vic. I did not look under the Route tab. Fred

Checked it yesterday. A couple of months ago I replaced the cap with one of those yellow, gasketed valve stem caps. When I unscrewed that cap yesterday, I think I heard a little "pop" sound. Clue #1. I put a little spit on there and it seemed to bubble once after maybe 30 seconds. So it does seem that the valve might be leaking. However, since the cap I put on it was pressurized, the cap is leaking at a rate slower than the valve at least. Not enough info to confirm/reject tube leak. I'll get a valve tool and tighten it up and go from there.

I experienced EA-100 issues soon after acquiring our J which has an Aspen PFD connected to a KFC-150 a/p. Sometimes I thought the damn a/p was trying to kill me. Speaking of great customer service: I explained my issue here and @Jake@BevanAviation replied that my A&P should check to make sure that the EA-100 was properly grounded. It wasn't. Since being properly grounded, I've had no problems. This did cause me to spend some time looking for a backup EA-100. Used ones are very rare. Most sold are in service it seems.

Configured as you suggested. When uploading a flt plan from iPad to IFD, it does take a few seconds for the "ready to upload" annunciation. After dismissing, the flight plan never arrives. I didn't notice, is there a required LSK press to accept the upload?

Mine too, but the paint on the logo is still crisp and shiny, making it "look" new!

Got this working today. I can now display traffic from the Stratus on the IFD540, which is what I really wanted. One weird thing is, I can download a flight plan from the IDF to Foreflight, but when I upload a flight plan from the iPad to the IFD it doesn't work. When I send the flight plan, a cyan dialog pops up in the lower right-hand side of the IFD saying something like "flight plan ready for upload". I click on that, and viola! Nothing happens. No other warnings or symptoms. Thanks to all for contributing to the discussion!

This is the first time I'm learning about this. Makes sense. Good to know. I'd nominate this piece of information for a MS FAQ. Is it controversial? Seems not.

I ordered a 6" Air Stop tube from AS a few months ago as a precaution because one of the mains is leaking a few psi per week. It's been on back-order every since! Anybody have a good suggestion for another source having them in stock, or is this a widespread problem? I figured it was easier to ask this crowd than spend time bird-dogging. Thx. Fred

Thanks for the data point. My J is 24-1402, and my UL is 880 according to the most recent W&B calcs. Looking at the low end of the distribution that my poll was designed to analyze, there is such a difference. Equipment? They are probably similarly equipped- mine has a KFC150 AP. The manual says that when they painted my J in 2019 they stripped it before painting, so that's not it. I've read that a paint job weighs at least 30 lb so if not stripped it goes on all the rides and eats UL. In an upgrade in March we installed a JPI EDM900 and removed all the legacy gauges and the ADF. It has a single Aspen PDF so it has vacuum pump, and legacy flight instruments required as backups but they don't weigh 10 lbs all together. When I bought it Jimmy G. told me that "in the early 80's J's started getting heavy". I didn't ask him for clarification as in "what changed"? Anybody know? Despite advice I give others, I'm starting to think about tempting fate and weighing it... Somebody STOP ME!

I've got the same issue. It's on my to-do list, but hasn't risen to the top yet. When I first flew my J in January, the heat was nice. That first flight I pulled the air on, with heat off, and the air was still warm. After five minutes or so, it cools down to "not hot, not cool". It seems that the hot air valve leaks pretty badly. Once an Alabama hangar once becomes a place where one can spend much time (latter half of Sept.) I'll take a look at that.

Thanks for posting. I'm ineligible by S/N.

In the shaky video the aircraft appeared in a flat spin.

Is not missile. Is not bomb. Prigozhin simply fell.

Curious- what makes one "2900 eligible"? I recall reading that the UL increase required redesign of the steel cage with some beefed up members. That sound muy expensivo as a retrofit.

I've used them. They are quite affordable. I think the whole set for our C model was about $100 a few years ago. The C set seemed all inclusive with different styles for different model years included. Since then I've had them make some custom labels for me. They charge about $25 per sheet. E-mail them: aero@aerographics.com for current pricing.

I have read on these pages that there is a company called Belofram who makes parts for diaphragms for pneumatic actuators. I've also read that if you contact them with the correct information in terms of fold type and dimensions, they will sell you one to fix a piece of industrial or farm equipment. If you search MS for this topic you might find someone who knows more about it than I do. I kind of lost interest once I figured out how to patch the step actuator diaphragm on our previous C model and didn't follow up on it any more. I think that some have had luck with them, without using the word "airplane".

Well, thinking about it, I cut scotchbrite into 1/4" strips, and worked it around in the bottom of the contact well with a small flat-bladed screwdriver. Three times per plug seemed to do the trick. Measured resistance of all eight plugs as 1200-1300 ohms. That's a solution. Before cleaning the varnish off the contact surface, I couldn't get a reliable resistance measurement.

A question: I've got the Tempest fine wire plugs out of our IO-360 for cleaning. Doing the resistance check, I notice some tarnish down in the contact well. Anybody have a good method for cleaning that?

Folks are ditching their vacuum AI's like crazy for digital. I need a vacuum AI as a backup to the single Aspen PFD in my J. I bought a serviceable one off eBay and sent it to a shop for OH. Total cost $700 for a freshly overhauled Sigma Tech 5000-37, which has internal lighting.

From the factory, our C had the poppy-red paint job shown in the top photo.

I just removed this from a frame and finished scanning it to post. Beat me by 30 seconds.

Not at all. The top category is >939 lb, which lets you fly with full 64 gallon tanks plus at least 556 lb of other stuff. I'm more interested in the low end of the distribution. Note in my profile that I have an '83J, before the MGW increase. I'm trying to get a sense for how heavy my bird is. I hope that explains why the poll is set up the way it is. Thanks to everyone who replies.

Interested to see what the range of UL for M20Js is. Please fill out the poll you own an M20J, or even if you used to own one.

One thing to keep in mind when draining the fuel to weigh an older Mooney is this: The fuel drains screw into a steel gusseted receptacle that is riveted in the bottom of the fuel tank where water sometimes accumulates. They corrode. Removing the fuel drain can damage them so be gentle. You'll find that in this case after screwing the fuel drain back in it doesn't completely seal. We discovered that problem in our '67C, and they replaced that steel receptacle when we had the tank resealed.