0TreeLemur

This Electronics International graphical engine monitor (CGR-30P) was removed from our '83 M20J as part of a panel upgrade. This unit was installed new in 2020 as the "Basic Package", but was modified by the factory to add display of Oil Temperature, which is not included in the basic package. This unit has about 150 flight hours on it. The STC is downloadable from EI's web page. This would go right back into a M20J with an IO-360 with a McCauley propeller. Reprogramming limits for other engines or propellers by the factory costs about $700. Works great for engine management. AS sells this unit new for 3.4 AMUs. I'm asking 2.25 AMUs. Includes everything as removed. The photo shows the unit for sale operating in our M20J in January, 2023.

Drat, you figured it out already. That was going to be my guess. CHT is the indicator of power production, and a single lower than normal EGT in a cylinder that is making normal power just doesn't make sense in a fuel injected engine. Glad you figured it out.

Sunday returning from New Mexico- avoiding thunderstorms at 7,500 ft. over eastern Arkansas. We cinched up before going under this stuff. To our pleasant surprise, it was smooth as glass.

The mechanism is a simple microswitch. Your contacts are not disengaging when the tab is fully downward deflected. Most likely out of adjustment. Perhaps the ice load somehow put enough force on the mechanism to push it out of adjustment. Perhaps the switch has failed. It requires servicing. The mechanism as I've heard it described is very simple. Mine will sometimes trigger after I wash the wings and catch a rag on it. The next time I turn the master switch on, the warning sounds. The stall horn only goes off if I go outside and push down on the tab. I'm worried that it is nearing an out of adjustment condition. Good luck. Keep us posted so we can learn from your experience.

So we know that -a- is flying. Where is he flying? Anyone know his tail number so we can follow him?

If no insurance, time for every one involved to

When I arrived in the SAF area Sunday after surfing some mountain wave, wind at LAM were 9G18. Diverted to SAF. Enroute, with DA of 10,100 at LAM, calculate 70 KIAS over the fence would actually be 81 KTAS. When I landed at SAF wind was 20 knots right down runway 20.

Fun video @PT20J. I'm flying to New Mexico again tomorrow. Planning to land at LAM, with SAF as plan B. Also planning to control my energy on final better than Harry Bliss!

Update. By using a shallow tray with some 91% Isopropyl Alcohol, dipping the case of the keyboard in and rubbing vigourously with a rough paper towel, pulled off a bunch of black goo. It's quite a bit better now. Another go and it will probably be non-tacky.

Yes, so was the one in my C. I dialed in a great calibration. It changed once over the five years I owned it, and was again spot-on after recalibration. Not sure why I'm seeing randomness in the installation in my J. I was hoping that someone solved this problem already and could give me a hint. The fuel pump doesn't lie.

M20J with no factory engine gauges:

The JPI EDM900 fuel flow sender in our previous C model was dialed in perfectly. It would say 43 gallons used, and when I filled it up, it took more or less 43 gallons. In our J model, the fuel flow sensor it isn't so accurate. Three weekends ago I flew 21 hours over three days. Lots of opportunities to compare indicated vs. actual fuel use. On one long cross country the totalizer said I used 50 gallons, when the actual use was 43. Another time, the JPI said I used 56 gal. when actual use was 62 gal. That's +15/-9% error. Anyone else dealt with this before? Thx.

I've got both. I've taken over several times from George when it has either disconnected due to turbulence, or failed to capture the vertical descent path (typ. due to operator error learning a new system or a slam dunk). I look at the steam gauges to get the quickest sight picture, especially the VSI and altimeter. The glass attitude indicator is easier to read than the vacuum one though.

The prior owner seems to have left it in the airplane, held to the panel with velcro. So maybe @ArtVandelay has the right idea. But I've got a plastic beard trimmer and an ooma VOIP box that both have had the same thing happen to them and they lived their entire lives indoors. Maybe it's humidity? Plenty of that to go around here in 'bama. I'll give it the @DonMuncy talcum powder treatment.

The Avidyne IFD-540 in our J came with a tiny bluetooth keyboard. The plastic on the keyboard case has become tacky (as in sticky feeling, not gauche or untastefully out of date). I tried magnetic tape cleaning isopropyl alcohol and rubbing. While that helped maybe a little, it's still tacky. What's the best way to deal with this? I've got several handheld electronic things that this has happened to as well. Some say baking soda solution. Before playing whack-a-mole, I seek professional advice. Oddly enough, I peeled the velcro off the back of the keyboard and in the area protected by the velcro adhesive the plastic feels normal. Thx. Fred

Of the three tires, the right main did not have one of those yellow painted brass/gasketed valve stem caps. I bought one and put it on the valve stem and made no difference. It's probably not the valve stem.

The right main tube on our J loses a couple of psi of air pressure per week. Doesn't seem to be anything in the tire. Can I just keep topping it off until the next annual or is this more urgent than I think it is?

I flew up/back 24 square burning 7.8 gph LOP in cruise. The engine monitor says that I burned just a tad under 10 gals up and back.

With fuel at my home drome at $6.50 and my tanks needing about 50 gallons, I flew 25 minutes north for a top off.

What audio panel do you have? If it is an older one that might be your problem. New ones sold today filter noise very well.

Hoskins strobe power supplies weight about 1/3 lb. I did go LED with the tail position/strobe and removed the power supply. Surprisingly light.

When I landed I had about 20 knots of headwind component, so I wasn't going that fast groundspeed. Still 70 KIAS over the fence. I landed on rwy 20 leaving an enormous amount of runway to coast. I couldn't even see the end. I used no more brakes than usual, just to make a turn-off. If no headwind, a little more wear on tires and bearings landing at higher TAS. It felt normal. The ground roll on takeoff on the other hand was noticeably longer. Instead of the usual 10-11 seconds, it was probably more like 20-25 seconds. With your four bladed fire breathing beast, you might not even notice much difference.

Those are rare. Usually you gotta buy the whole strobe to get one. Maybe somebody around here has one sitting on a shelf from an LED upgrade. Good luck.

Weekend before last I landed our J at SAF on rwy 20 with winds 230@18G30 , temperature 29C, and density altitude 9200'. So busy dealing with gusty crosswind component that the 8000' runway seemed immense. RJ's and 737s use that runway. Runway length is a non-issue for a piston single. Have a good trip.

Similar to mine: