PierreL Posted February 28 Report Posted February 28 (edited) Hello, I am looking for this 2 plastic parts : Reading at others posts it was not clear for me if they can be purchased or 3D printed and what is the cost. Any advice is welcome. Many thanks. Edited February 28 by PierreL
IvanP Posted February 28 Report Posted February 28 Lasar used to have the cap assembly listed for cool $965. https://lasar.com/switches/switch-cap-assy-cwsap-disconnect-trim-088-01091-0004 I restored a cracked onel last year. Lasar currently indicates sold out, but if you reach out to the parts dept, Heather may be able to point you in the right direction. I hope you will be able to find it for a better price. It is a really flimsy piece of plastic that I cannot see would justify 1 AMU price tag.
Pinecone Posted February 28 Report Posted February 28 Hmm, if someone has the parts in good condition, I have a friend who can CAD them and make a 3D print file.
LANCECASPER Posted March 1 Report Posted March 1 9 hours ago, PierreL said: Hello, I am looking for this 2 plastic parts : Reading at others posts it was not clear for me if they can be purchased or 3D printed and what is the cost. Any advice is welcome. Many thanks. This might work: https://www.thingiverse.com/thing:4340751
PierreL Posted March 2 Author Report Posted March 2 Thank you for this CAD file that I previously seen on Mooneyspace. The bendix trim screw holes don't correspond to the one I have. It might be adjusted. I was just wondering if someone already had this 3D printed and how it looks like.
Aerodon Posted March 3 Report Posted March 3 On 2/28/2025 at 8:48 AM, PierreL said: Hello, I am looking for this 2 plastic parts : Reading at others posts it was not clear for me if they can be purchased or 3D printed and what is the cost. Any advice is welcome. Many thanks. I have them for you, send me a PM.
Recommended Posts