Where is your lift detector tab positioned in the opening in the wing?

[Pinecone]

12 hours ago, PT20J said:

Here's what it looks like:

WOW, that is a crappy weld.  Undercut.

[Pinecone]

Mine got damaged, so it was going off all the time.  I talked to Maxwell about it, and they have a way of dealing with it.   I went to Mooney Max at Longview and son (can't remember name) fixed it for me.  No charge.

IIRC you grab the vane with pliers and pull on it when applying pressure.  I forget which way.

[PT20J]

2 minutes ago, Pinecone said:

Mine got damaged, so it was going off all the time.  I talked to Maxwell about it, and they have a way of dealing with it.   I went to Mooney Max at Longview and son (can't remember name) fixed it for me.  No charge.

IIRC you grab the vane with pliers and pull on it when applying pressure.  I forget which way.

Paul  The Maxwell’s are great folks.

[Pinecone]

Thanks, yes, Paul.  I would forget my own name if I did not carry ID.

They told me how to do it on the phone.  I asked at MM, and next day Paul told me it was done.  I asked for the bill, was told No Charge.  It seems it takes a minute, literally.