Jump to content

Recommended Posts

Posted

We own a '67 M20F and apparently our roof top air scoop blew off last time I flew.  It was there during my preflight, but no where to be found upon landing.  Any suggestions or recommendations on getting a replacement and is it something that someone with reasonable mechanical skills could replace on their own?  Thanks for the input.

Posted

The best bet would be to find one, then take it to someone who has a scanner.  Then it would be easy to print, but would still require some iteration to get exactly right.  It is also a little known fact that most 3-D prints are not water tight, and one built this way might leak.

  • Like 1
Posted

should be able to get one from almost any wrecked c,d,e,f,g.

 

looking at the thing i have no clue as to how it keeps water out,  no seal and seems to be filled with fiberglass/straw

Posted
17 minutes ago, McMooney said:

should be able to get one from almost any wrecked c,d,e,f,g.

 

looking at the thing i have no clue as to how it keeps water out,  no seal and seems to be filled with fiberglass/straw

It doesn't keep the water out, the horsehair in the plenum condenses any airbourn water which drains out a drain tube that exits below the fuselage by the battery vents.

  • Like 4
Posted

Rich is correct.  The plenum is sealed to the cabin roof skin, and in the back there is an aluminum drain tube that exits through the belly along the back of the baggage compartment wall.

Patrick, I have a scoop removed from my '77 J that might work for you.  Take a look here:  

 

and let me know if you'd like it.  I have sold the bundle of parts but haven't been paid or shipped yet.  I asked the buyer if he would mind letting the scoop go for someone with an urgent need and he agreed.

  • Like 1
Posted
15 hours ago, KSMooniac said:

Rich is correct.  The plenum is sealed to the cabin roof skin, and in the back there is an aluminum drain tube that exits through the belly along the back of the baggage compartment wall.

Patrick, I have a scoop removed from my '77 J that might work for you.  Take a look here:  

 

and let me know if you'd like it.  I have sold the bundle of parts but haven't been paid or shipped yet.  I asked the buyer if he would mind letting the scoop go for someone with an urgent need and he agreed.

Sent a message to you, Scott.

Posted

Patrick - did you find one?  I have one off of my F but it has a broken hinge, which is why I bought one from salvage.  Wasn't cheap - about $230 - from Dawson Aircraft.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.