Jump to content

Looking for switches/replacements for 1977 J

Wojciech Kacprzyński
 Share

Recommended Posts

Wojciech Kacprzyński Explorer

Wojciech Kacprzyński

Posted
Posted

Hi everyone,

Do you reccomend or know about any not crazy expensive switches for the J model? The part numers I'm looking for are:

930023-011

930023-007

930023-001

930023-005

930023-003

930023-015

Some previous owner just put there CB car switches instead of buying new ones. I'm trying to find a suitable replacement for them. Do you know who can provide something simmilar and approved?

 

haymak3r Rising Star

haymak3r

Posted
Posted (edited)

Do you need the actual CB switch itself? Or just the caps. If just the caps, then I suggest getting new ones send to you. They can somewhat be easily replaced. I had a few that were broken. The switch itself is just fine.

 

@AH-1 Cobra Pilot, do you still have the switch covers available?

Edited by haymak3r
haymak3r Rising Star

haymak3r

Posted
Posted

Not sure how to properly tag somebody lol. But he is the person whom had them available. and they look WAY better than my old faded ones. :) And the switches switch on and off way easier now too. 

Fly Boomer Grand Master

Fly Boomer

Posted
Posted
2 hours ago, haymak3r said:

Not sure how to properly tag somebody lol. But he is the person whom had them available. and they look WAY better than my old faded ones. :) And the switches switch on and off way easier now too. 

@AH-1 Cobra Pilot  Just type the "at" sign followed by the next couple of characters, and pick who you want from a pop-up list.  If there are too many, you may need more than a couple of characters after the "at" sign.  You can't type the name, and then add the "at" sign later.  Also, I think it fails if you try to cut and paste.  Cobra Pilot was at the top of the pop-up after typing "@ah".

  • Like 1
haymak3r Rising Star

haymak3r

Posted
Posted

well shoot.

20 hours ago, Fly Boomer said:

@AH-1 Cobra Pilot  Just type the "at" sign followed by the next couple of characters, and pick who you want from a pop-up list.  If there are too many, you may need more than a couple of characters after the "at" sign.  You can't type the name, and then add the "at" sign later.  Also, I think it fails if you try to cut and paste.  Cobra Pilot was at the top of the pop-up after typing "@ah".

well shoot. thanks! Ya I copied and pasted his name in after the @, lol.

carusoam Grand Master

carusoam

Posted
Posted
3 hours ago, Red Leader said:

Where does one get replacement switch caps?

 

On 10/18/2022 at 7:28 PM, Fly Boomer said:

@AH-1 Cobra Pilot  Just type the "at" sign followed by the next couple of characters, and pick who you want from a pop-up list.  If there are too many, you may need more than a couple of characters after the "at" sign.  You can't type the name, and then add the "at" sign later.  Also, I think it fails if you try to cut and paste.  Cobra Pilot was at the top of the pop-up after typing "@ah".

Find the cobra pilot…

He has developed a pretty nice method of 3D printing….

 

Unfortunately… the OEM hasn’t wanted to sell the caps individually…

I haven’t tried to buy one in about a decade, soooo…. Things may have changed…

 

Best regards,

-a-

AH-1 Cobra Pilot Experienced

AH-1 Cobra Pilot

Posted
Posted

Yes, I have the covers available.  In fact, I have run out of a few and need to make some new ones, so if you want anything special, ask now.

I have been dealing with a family emergency for the past week+, so I am a little slow in responding.

Red Leader Collaborator

Red Leader

Posted
Posted

Sorry to hear about your family emergency, hope things work out. How much do you charge for the new button caps? I would love to replace them all in my M20K.

Marauder Grand Master

Marauder

Posted
Posted
I have a 78J and in need of some covers.  How do I know if they are Kilxon or ETA?  Also, do you sell all the caps or only specific ones?

Top one is a Klixon. Bottom one is an ETA.

57a4254f11e60ac3aa0b7592eedd1a55.jpg


Sent from my iPhone using Tapatalk Pro
  • Like 3
LANCECASPER Grand Master

LANCECASPER

Posted
Posted
On 10/18/2022 at 3:34 PM, haymak3r said:

Not sure how to properly tag somebody lol. But he is the person whom had them available. and they look WAY better than my old faded ones. :) And the switches switch on and off way easier now too. 

Mooneyspace Grammar Police :)

Someone shared this with me years ago. A quick, easy way to know whether to use who or whom is to substitute the pronouns he/her (for who)  or him/her (for whom) and see which one works.

In the above example put him/her or he/she before "had them available". "He had them available", so who works. 

An opposite example: Someone asks, "To whom are you referring?", You would answer, "I'm referring to him", not he. 

 

 

  • Like 2
  • Thanks 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.