Shiny moose Posted August 1, 2021 Report Share Posted August 1, 2021 I would like another striker plate, PN 310214. very nice condition or well used doesnt matter Quote Link to comment Share on other sites More sharing options...
carusoam Posted August 1, 2021 Report Share Posted August 1, 2021 @Alan Fox should have half a dozen in his back pocket… (door latch striker plate) -a- Quote Link to comment Share on other sites More sharing options...
Alan Fox Posted August 1, 2021 Report Share Posted August 1, 2021 Nope they get trashed with the fuselage Quote Link to comment Share on other sites More sharing options...
kortopates Posted August 1, 2021 Report Share Posted August 1, 2021 Easily fabricated and not expensive to make. 1 Quote Link to comment Share on other sites More sharing options...
N201MKTurbo Posted August 2, 2021 Report Share Posted August 2, 2021 What’s wrong with that one? I’ve seen worse. Is it the looks or the function? On my old F mooney, I put a washer behind each screw to move the plate out 1/16” and it worked much better. Quote Link to comment Share on other sites More sharing options...
Shiny moose Posted August 2, 2021 Author Report Share Posted August 2, 2021 Door closes fine but I would like door to close tighter along the door seal, Looking for sample to make one but want to keep mine on until new one is completed, Im slow and I figured it would be cheap enough Quote Link to comment Share on other sites More sharing options...
RLCarter Posted August 2, 2021 Report Share Posted August 2, 2021 24 minutes ago, Shiny moose said: Door closes fine but I would like door to close tighter along the door seal, Looking for sample to make one but want to keep mine on until new one is completed, Im slow and I figured it would be cheap enough Doors get tweaked over time, close a dollar bill (fully closed and latched) in multiple places, tug on the bill and see where it’s not snug. If it’s the top half it probably can be adjusted with the top latch Quote Link to comment Share on other sites More sharing options...
Shiny moose Posted August 2, 2021 Author Report Share Posted August 2, 2021 13 hours ago, RLCarter said: Doors get tweaked over time, close a dollar bill (fully closed and latched) in multiple places, tug on the bill and see where it’s not snug. If it’s the top half it probably can be adjusted with the top latch Door is not a probelm, Door not tweeked, Top snug and flush, lower main latch area is the area I would like to bring in and flush, wher it belongs, Im still looking for one 1 Quote Link to comment Share on other sites More sharing options...
LANCECASPER Posted August 3, 2021 Report Share Posted August 3, 2021 21 hours ago, RLCarter said: Doors get tweaked over time, close a dollar bill (fully closed and latched) in multiple places, tug on the bill and see where it’s not snug. If it’s the top half it probably can be adjusted with the top latch Make sure it's only a $1 bill also. Since it's an airplane, if you put $100 bills in multiple places you'll never see any of them again. 1 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.