RFriesen Posted May 31, 2020 Report Posted May 31, 2020 Removed from Bonanza V35. Features a bright, 3.5-inch sunlight-readable liquid crystal display (LCD), the G5 is approved as a primary source for aircraft attitude or turn coordination information and secondary source for altitude, airspeed and vertical speed in a single instrument. Installation is simple and easy as the G5 integrates with the aircraft’s existing pitot/static system to display attitude, airspeed, altitude, vertical speed, slip/skid, turn rate, configurable V-speed references, barometric setting and selected altitude as well as visual alerts upon arriving at the pre-selected altitude. GPS-based track and groundspeed information is also displayed. A dedicated rotary knob also allows for easy adjustments to barometric pressure setting as well as altitude and ground track bugs.Back up battery included. Quote
N201MKTurbo Posted May 31, 2020 Report Posted May 31, 2020 Just now, robert7467 said: Does this do HSI with GS? It will if you hook up a GAD29. I have a GAD29 (not a B) with a brand new connector kit that you can have for $250 Quote
Tahir K Posted May 31, 2020 Report Posted May 31, 2020 It will if you hook up a GAD29. I have a GAD29 (not a with a brand new connector kit that you can have for $250 What's the difference on the B model? Quote
N201MKTurbo Posted June 1, 2020 Report Posted June 1, 2020 2 hours ago, Tahir K said: What's the difference on the B model? I tried for 5 minutes to get rid of that stupid emoticon! And the damn thing is back. Anyway, the GAD29 will not drive the heading bug on your autopilot. It will do everything else. 1 Quote
N201MKTurbo Posted June 1, 2020 Report Posted June 1, 2020 1 hour ago, robert7467 said: Does this do HSI with GS? Yes and yes. You will need a GMU11 heading sensor too. Quote
robert7467 Posted June 1, 2020 Report Posted June 1, 2020 I know it will not work for VOR/Loc on a KX 155, but I think the KX165 has the digital outputs. Do you think it will work with a 165? Quote
N201MKTurbo Posted June 1, 2020 Report Posted June 1, 2020 40 minutes ago, robert7467 said: I know it will not work for VOR/Loc on a KX 155, but I think the KX165 has the digital outputs. Do you think it will work with a 165? No, it will not take analog signals, it needs both RS232 map messages and AIRINC navigation data. You will need a 430 or better. Quote
OR75 Posted June 3, 2020 Report Posted June 3, 2020 I am curious if you can get the STC authorization from Garmin when you buy a used unit Garmin gave it for the initial installation Quote
Spurious Moppet Posted June 6, 2020 Report Posted June 6, 2020 On 6/2/2020 at 7:20 PM, OR75 said: I am curious if you can get the STC authorization from Garmin when you buy a used unit Garmin gave it for the initial installation Before buying this check with Garmin on how much the STC will cost you. I thought it was around $600 but that was a couple years ago that I saw that on Beechtalk. 1 Quote
OR75 Posted June 6, 2020 Report Posted June 6, 2020 Sounds about right. That’s roughly the cost different between the experimental and the certified version Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.