Looking for control yoke and shaft ...

[170driver]

I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated.

Less urgently required, but will be needed eventually - u-joints for the trim system.

 

Thanks,

Dave Blom

C-GAVX

 

 

Sent from my iPhone using Tapatalk

[moodychief]

Try Dawson Salvage in Clinton AR.  They had a couple of Mooney’s they were parting out.

[carusoam]

On 7/28/2019 at 2:59 PM, 170driver said:

 

I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated.

Less urgently required, but will be needed eventually - u-joints for the trim system.

 

Thanks,

Dave Blom

C-GAVX

 

 

Sent from my iPhone using Tapatalk

 

Today could be your lucky day...

Find @Alan Fox he has an M20C that is ready to share parts with the rest of the fleet...

Best regards,

-a-

[170driver]

Thanks - looks like this is a later model C though, without “PC”. PC actually works in my Mooney & I find it quite convenient.


Sent from my iPhone using Tapatalk

[carusoam]

Mooneys have two different shaft diameters through their history...

Also watch for small details of how parts are oriented compared to bolt holes...

Best to match part numbers than to compare year of manufacture...

PC on the yoke is just a valve/switch that is modernized by moving to a panel location.

Having the button so readily available, and used so infrequently... left room for improvement...

The panel mounted version is an electronic switch operating a mechanical valve...

PP thoughts only, not a mechanic...

Best regards,

-a-

[SheryLoewen]

pilot’s side control yoke and shaft. Loewens Mooney salvage has both  

Paul L.

[carusoam]

Dave @170driver,

Your answer may have arrived...  ^^^^

Best regards,

-a-

[Easab]

I have a 74 mooney m20c with the old looking white yokes but would like to upgrade to the m20j black bigger yokes. Question is are they interchangeable??

[gsxrpilot]

2 hours ago, Easab said:

I have a 74 mooney m20c with the old looking white yokes but would like to upgrade to the m20j black bigger yokes. Question is are they interchangeable??

Didn't someone just answer this question? 

[MrRodgers]

I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated.
Less urgently required, but will be needed eventually - u-joints for the trim system.
 
Thanks,
Dave Blom
C-GAVX
 
 
Sent from my iPhone using Tapatalk

Contact Paul Loewen. He will have what you need.

https://www.loewensmooneysalvage.com/



Sent from my iPhone using Tapatalk