170driver

Looking for control yoke and shaft ...

Recommended Posts

I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated.

Less urgently required, but will be needed eventually - u-joints for the trim system.

 

Thanks,

Dave Blom

C-GAVX

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

*Members that donate $10 or more do not see advertisements*

On 7/28/2019 at 2:59 PM, 170driver said:

 

I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated.

Less urgently required, but will be needed eventually - u-joints for the trim system.

 

Thanks,

Dave Blom

C-GAVX

 

 

Sent from my iPhone using Tapatalk

 

Today could be your lucky day...

Find @Alan Fox he has an M20C that is ready to share parts with the rest of the fleet...

Best regards,

-a-

Share this post


Link to post
Share on other sites

Thanks - looks like this is a later model C though, without “PC”. PC actually works in my Mooney & I find it quite convenient.


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Mooneys have two different shaft diameters through their history...

Also watch for small details of how parts are oriented compared to bolt holes...

Best to match part numbers than to compare year of manufacture...

PC on the yoke is just a valve/switch that is modernized by moving to a panel location.

Having the button so readily available, and used so infrequently... left room for improvement...

The panel mounted version is an electronic switch operating a mechanical valve...

PP thoughts only, not a mechanic...

Best regards,

-a-

Share this post


Link to post
Share on other sites

I have a 74 mooney m20c with the old looking white yokes but would like to upgrade to the m20j black bigger yokes. Question is are they interchangeable??

Share this post


Link to post
Share on other sites
2 hours ago, Easab said:

I have a 74 mooney m20c with the old looking white yokes but would like to upgrade to the m20j black bigger yokes. Question is are they interchangeable??

Didn't someone just answer this question? -_-

Share this post


Link to post
Share on other sites

I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated.
Less urgently required, but will be needed eventually - u-joints for the trim system.
 
Thanks,
Dave Blom
C-GAVX
 
 
Sent from my iPhone using Tapatalk



Contact Paul Loewen. He will have what you need.

https://www.loewensmooneysalvage.com/



Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.