170driver Posted July 28, 2019 Report Posted July 28, 2019 I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated. Less urgently required, but will be needed eventually - u-joints for the trim system. Thanks, Dave Blom C-GAVX Sent from my iPhone using Tapatalk Quote
moodychief Posted August 8, 2019 Report Posted August 8, 2019 Try Dawson Salvage in Clinton AR. They had a couple of Mooney’s they were parting out. Quote
carusoam Posted August 9, 2019 Report Posted August 9, 2019 On 7/28/2019 at 2:59 PM, 170driver said: I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated. Less urgently required, but will be needed eventually - u-joints for the trim system. Thanks, Dave Blom C-GAVX Sent from my iPhone using Tapatalk Today could be your lucky day... Find @Alan Fox he has an M20C that is ready to share parts with the rest of the fleet... Best regards, -a- Quote
170driver Posted August 9, 2019 Author Report Posted August 9, 2019 Thanks - looks like this is a later model C though, without “PC”. PC actually works in my Mooney & I find it quite convenient. Sent from my iPhone using Tapatalk Quote
carusoam Posted August 11, 2019 Report Posted August 11, 2019 Mooneys have two different shaft diameters through their history... Also watch for small details of how parts are oriented compared to bolt holes... Best to match part numbers than to compare year of manufacture... PC on the yoke is just a valve/switch that is modernized by moving to a panel location. Having the button so readily available, and used so infrequently... left room for improvement... The panel mounted version is an electronic switch operating a mechanical valve... PP thoughts only, not a mechanic... Best regards, -a- Quote
SheryLoewen Posted October 6, 2019 Report Posted October 6, 2019 pilot’s side control yoke and shaft. Loewens Mooney salvage has both Paul L. Quote
carusoam Posted October 9, 2019 Report Posted October 9, 2019 Dave @170driver, Your answer may have arrived... ^^^^ Best regards, -a- Quote
Easab Posted October 13, 2019 Report Posted October 13, 2019 I have a 74 mooney m20c with the old looking white yokes but would like to upgrade to the m20j black bigger yokes. Question is are they interchangeable?? Quote
gsxrpilot Posted October 14, 2019 Report Posted October 14, 2019 2 hours ago, Easab said: I have a 74 mooney m20c with the old looking white yokes but would like to upgrade to the m20j black bigger yokes. Question is are they interchangeable?? Didn't someone just answer this question? Quote
MrRodgers Posted October 15, 2019 Report Posted October 15, 2019 I have a 1968 C model & need a pilot’s side control yoke and shaft. Any suggestions about where to look would be greatly appreciated. Less urgently required, but will be needed eventually - u-joints for the trim system. Thanks,Dave BlomC-GAVX Sent from my iPhone using Tapatalk Contact Paul Loewen. He will have what you need. https://www.loewensmooneysalvage.com/Sent from my iPhone using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.