philipneeper Posted July 8, 2014 Report Posted July 8, 2014 Mooniacs, I am curious if anyone can look into their manuals for the part numbers for the master brake cylinders on a 1978 M20C Ranger. Im in Afghanistan and my manuals are home. Found a pair on eBay that I could use. Also, part number for the brake calipers to? Thank you! V/R, Philip
DaV8or Posted July 8, 2014 Report Posted July 8, 2014 I did look, but my manuals only go up to 1976, so they might be the same?? Can't say for sure.
bonal Posted July 8, 2014 Report Posted July 8, 2014 The master cylinders to look for can be two different ones 880012-501 or 880027-501 The wheels cylinders to look for are 30-56A
jetdriven Posted July 8, 2014 Report Posted July 8, 2014 I have a pair of Paramount master cylinders if you are interested. Fresh seal kit. I upgraded to Cleveland MC's and dual brakes.
philipneeper Posted July 8, 2014 Author Report Posted July 8, 2014 I have a pair of Paramount master cylinders if you are interested. Fresh seal kit. I upgraded to Cleveland MC's and dual brakes. My Ranger has dual brakes, can you send me a picture of these please.
philipneeper Posted July 8, 2014 Author Report Posted July 8, 2014 The master cylinders to look for can be two different ones 880012-501 or 880027-501 The wheels cylinders to look for are 30-56A Im looking for the calipers, my cylinders are good. Thank you for the part number to the masters.
philipneeper Posted July 8, 2014 Author Report Posted July 8, 2014 I seen these on eBay, I know when i was doing my rebuild mine looked like these. http://www.ebay.com/itm/291183113769?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Marauder Posted July 8, 2014 Report Posted July 8, 2014 I just sent you a PM with the entire brake parts section. Let me know if you can't read any of the numbers.
jetdriven Posted July 8, 2014 Report Posted July 8, 2014 those look like a Beech part number. I PM'd you a photo of mine
N601RX Posted July 8, 2014 Report Posted July 8, 2014 Mine were severely pitted and I had to replace them a couple of years ago. New ones were about $700, but you can buy just the new housing for under $200 and put your pistons and other parts on them.
philipneeper Posted July 8, 2014 Author Report Posted July 8, 2014 Yea my calipers are pitted and leaking, mainly from the left.
jetdriven Posted July 8, 2014 Report Posted July 8, 2014 my right caliper was leaking and pitted, I did manage to hone it lightly and put a new O-ring in there. It fixed the leak.
philipneeper Posted July 8, 2014 Author Report Posted July 8, 2014 i did that last year to both, just the left one wants to be different.
rbridges Posted July 8, 2014 Report Posted July 8, 2014 good thread. shows what a great resource this forum is. 1
Dave Marten Posted July 9, 2014 Report Posted July 9, 2014 Philip, Thanks for your service. Stay safe out there and hopefully you'll have some time to enjoy your Mooney when you get back. If any of you guys have the parts he needs on-hand let's get 'em what he needs. If somebody has the parts step up and post your price. I'll kick in some $
philipneeper Posted July 9, 2014 Author Report Posted July 9, 2014 Philip, Thanks for your service. Stay safe out there and hopefully you'll have some time to enjoy your Mooney when you get back. If any of you guys have the parts he needs on-hand let's get 'em what he needs. If somebody has the parts step up and post your price. I'll kick in some $ Dave, Thank you! I appreciate you wanting to help but I seriously couldn't ask anyone to do that. Mooneyspace has been a wonders of helps since 2010. All i could use is the advice from fellow mooneyspacers. 1
N601RX Posted July 9, 2014 Report Posted July 9, 2014 Here is a good resource I have used before to save some money when dealing with brakes. Up front there is a cross reference section that shows the pn for each brake component and which aircraft they are approved for. This is very valuable if looking for used parts. Another thing I have found is that many of the Cleveland master cylinders are very similar if not almost identical even though they may have a different PN. For example look on page 60 and you will see the 10-49/A-110-37 master cylinder used on many Mooneys. By looking in the chart on the same page you will see that the 10-49 and 10-54A are manufactured using the same parts with the exception of a spacer and different clevis end. Guess which one is much more readily available and sells for less than half of the other one? The same is true with wheel cylinders (page 87). http://www.parker.com/literature/Aircraft%20Wheel%20&%20Brake%20Division/AWB%20Static%20Files%20for%20Literature/AWBPC0001-14.pdf
philipneeper Posted July 9, 2014 Author Report Posted July 9, 2014 N601RX, thank you for the info. I was looking for a cross reference list last night. This will help a ton!
DaV8or Posted July 9, 2014 Report Posted July 9, 2014 i did that last year to both, just the left one wants to be different. I learned a long time ago in the vintage car business, that honing and rebuild kits for hydraulics is usually a waste of money and in antique cars it can be dangerous. That's why this year at annual in a couple of weeks, I'm replacing my left caliper cylinder, piston and seal with brand new. I took the advise of others and had it resealed twice, once by Top Gun and once by LASAR and it still leaks. Mind you, unlike cars, just the cylinder, piston and seal is costing me nearly $400 with tax and shipping. It's not even the whole caliper assembly, just parts of it. $400 buys you an entire new hydraulic system in car! Oh well, I had to have an airplane... 1
jbs007 Posted July 15, 2014 Report Posted July 15, 2014 Neeper, where you at? Where you stationed? I'm at Bastion right now. I replaced all rotors and pads with parts from aircraft spruce before I got here. Price for these parts isn't bad and shipping was 2 days to San Diego. Like bonal showed, different caliper/piston arrangements were used for different years. I don't know if you have any time constraints, but it might be better to wait till you get home to make sure you get the right ones.
philipneeper Posted July 15, 2014 Author Report Posted July 15, 2014 Neeper, where you at? Where you stationed? I'm at Bastion right now. I replaced all rotors and pads with parts from aircraft spruce before I got here. Price for these parts isn't bad and shipping was 2 days to San Diego. Like bonal showed, different caliper/piston arrangements were used for different years. I don't know if you have any time constraints, but it might be better to wait till you get home to make sure you get the right ones. I'm inKAF at the moment. Stationed in Savannah. Just trying to get all the big ticket items ready for when I get home. Right now I have 3 instruments at a repair shop and looking for an alternator.
Recommended Posts