Mooney M20E 1975 interior piece

[ighazali]

I am looking for the interior piece that goes right under the throttle quadrant which allows for airflow and cabin heat. The plastic edging on my part is coming undone causing the metal flap to fallout.

Also can someone please tell me where i can buy a BLUE prop lever handle because the Mooney currently has a black one and I would like to replace it with a blue one.

 

Please see images.  

[Jsno]

Check with Mooney salvage yards for the vent piece.  I would just paint the knob with blue paint. 

[Hank]

5 minutes ago, Jsno said:

Check with Mooney salvage yards for the vent piece.  I would just paint the knob with blue paint. 

I've been living with the factory-installed black knob in my C for 18 years now . . . .

[Yetti]

Funny enough you should be able to buy a blue knob from Spruce

Your vent does not look the same as my 75 did.   might not be a stock vent.   Cut out some alum or wood or plexiglass and paint to match.   Yours only has 2 knobs there.   my built in Dec 1974  1975 model also had the parking brake long with the other 2 vent controls. 

[bixmooney]

my console looks the same too, 75F model except below the lighting where the vent is. Here’s a picture of mine if it helps you.

Black knob also.

 

Edited October 10 by bixmooney

[ighazali]

On 10/10/2025 at 1:21 PM, bixmooney said:

my console looks the same too, 75F model except below the lighting where the vent is. Here’s a picture of mine if it helps you.

Black knob also.

 

That is the one! That plastic vent piece I cannot find anywhere! 

[M20F-1968]

Parts like this are more easily made than found.

Take your could part and use it as a mold.  Hand layup a new part.  By rights, you should use antimony trioxide into the resin as a flame retardant.  

Use mold release.  Sand and fit appropriately.

John Breda