warrenehc Posted May 20, 2021 Report Posted May 20, 2021 (edited) Hello, I have a powerflow exhaust on my 67F. The baffle came loose from it’s weld and is out of the muffler currently. What is people’s experience with re-welding it back to the muffler? Certified shop, any weld shop, left removed and flew without? Edited May 20, 2021 by warrenehc Quote
N201MKTurbo Posted May 20, 2021 Report Posted May 20, 2021 AC43-13 has a section about weld repairs. As long as your shop follows or supervises someone who follows it, you are approved to repair it. Quote
EricJ Posted May 20, 2021 Report Posted May 20, 2021 3 hours ago, warrenehc said: Hello, I have a powerflow exhaust on my 67F. The baffle came loose from it’s weld and is out of the muffler currently. What is people’s experience with re-welding it back to the muffler? Certified shop, any weld shop, left removed and flew without? Are you talking about the flame tube inside the muffler? AFAIK it doesn't need to be there. The inspection criterion is just that there aren't pieces blocking the flow. Mine has deteriorated over the years and just disappeared. There is essentially no flame tube left. Quote
carusoam Posted May 21, 2021 Report Posted May 21, 2021 Something to consider... Interior baffles of an exhaust system affect how the exhaust flows through the system... They mostly keep the hottest exhaust from impinging on the outside can... When the hottest part of the exhaust more directly contacts the outer part... stresses and other things can happen... It is best to have all of the exhaust system parts in place to get the same performance you are expecting... Worst case issues to be aware of... welds opening in the exhaust that can allow CO to escape into the heat system... Make sure you have a good CO meter... PP thoughts only, not a mechanic... Best regards, -a- 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.