Skybrd Posted March 26, 2018 Report Posted March 26, 2018 (edited) I'm not ready to buy a new adsb out transponder just yet. My King KT76 TSO transponder is giving me problems. If you have a good used one that you could part with please contact me. Note the King Kt76a transponder won't replace mine. That one requires wiring and rear plug changes. The only one that will work is the old plain model kt76 tso unit. Thanks. Edited March 26, 2018 by Skybrd remove phone number
LANCECASPER Posted March 26, 2018 Report Posted March 26, 2018 The face on this one looks a little rough, but they say it was working when removed. https://www.ebay.com/itm/Bendix-King-KT76-Transponder-w-Tray-Back-Plate-P-N-066-1034-00/332594336743?epid=538220492&hash=item4d702ad3e7:g:nRMAAOSwUUdasp3B&vxp=mtr
carusoam Posted March 26, 2018 Report Posted March 26, 2018 Also consider the KT76C... slide in, non-ADSB... replacement for the KT76... I think I may have learned this from @Alan Fox... PP thoughts only, I’m not a radio guy... Best regards, -a-
kerry Posted March 26, 2018 Report Posted March 26, 2018 I saw this one for sale on craigslist. https://lasvegas.craigslist.org/avo/d/avionics-gps-nav-com-dme/6541428761.html
carqwik Posted March 26, 2018 Report Posted March 26, 2018 If you can wait until summer, I could part with my KT-76C then.
KSMooniac Posted March 26, 2018 Report Posted March 26, 2018 I was in the same boat many years ago and couldn't find a replacement. I bit the bullet and went for the 330ES as it was the only option at the time. There are far fewer 76 models in the wild compared to the 76A. There is a Cessna/ARC transponder that will slide in, but those are equally scarce.Sent from my LG-US996 using Tapatalk
Alan Fox Posted March 26, 2018 Report Posted March 26, 2018 52 minutes ago, carqwik said: If you can wait until summer, I could part with my KT-76C then. 76c wont fit , only 76 , or 78 They are hard to find anymore .... 1
flyboy0681 Posted March 26, 2018 Report Posted March 26, 2018 We just had a KT76C pushed into the same tray as our old KT76.
Skybrd Posted March 26, 2018 Author Report Posted March 26, 2018 56 minutes ago, Alan Fox said: 76c wont fit , only 76 , or 78 They are hard to find anymore .... Thats what I have learned. The rear connector on the newer KT76 with any additions a b c or what ever uses both sides of the connector and requires a different connector and additional wiring. Probably need a different housing since the connector is different.
Skybrd Posted March 26, 2018 Author Report Posted March 26, 2018 12 hours ago, LANCECASPER said: The face on this one looks a little rough, but they say it was working when removed. https://www.ebay.com/itm/Bendix-King-KT76-Transponder-w-Tray-Back-Plate-P-N-066-1034-00/332594336743?epid=538220492&hash=item4d702ad3e7:g:nRMAAOSwUUdasp3B&vxp=mtr Thanks, I will look into this.
Alan Fox Posted March 26, 2018 Report Posted March 26, 2018 1 hour ago, flyboy0681 said: We just had a KT76C pushed into the same tray as our old KT76. It was a 76A
flyboy0681 Posted March 26, 2018 Report Posted March 26, 2018 2 minutes ago, Alan Fox said: It was a 76A Correct
lotsofgadgets Posted March 28, 2018 Report Posted March 28, 2018 I have a working KT76A I just removed from my 201. make an offer. I pulled it for an ADSB upgrade to the Stratus ESGi.
Alan Fox Posted April 1, 2018 Report Posted April 1, 2018 On 3/28/2018 at 8:45 AM, lotsofgadgets said: I have a working KT76A I just removed from my 201. make an offer. I pulled it for an ADSB upgrade to the Stratus ESGi. Wont fit
Skybrd Posted April 2, 2018 Author Report Posted April 2, 2018 Thanks for all the responses. I acted on one reply suggestion. Anyway, I got a used one and it seems to work ok. My transponder was a older one that the revised ones won't directly work without wiring and connector changes. Again, thanks to all that responded.
Recommended Posts