FBV Posted December 28, 2017 Report Posted December 28, 2017 I’m going to have a shop make a new badge for my co-pilot yoke. It will be laser engraved powder coat. So it should be scratch resistant and look sharp for years. As I get only one made, it would be cheaper to share the cost if others were interesting in getting one too. I have the logo artwork from the Mooney factory. Not looking to make a profit here. Just want to spread the offer to others that may need a facelift on their pre-J model. I’d suspect that parts would be about $40 each or less. Sent from my iPhone using Tapatalk Quote
jpindy Posted December 28, 2017 Report Posted December 28, 2017 I am interested for one of themSent from my iPhone using Tapatalk Pro Quote
cctsurf Posted December 28, 2017 Report Posted December 28, 2017 Check out this thread from a while ago: Quote
N5937Q Posted December 29, 2017 Report Posted December 29, 2017 I’m going to have a shop make a new badge for my co-pilot yoke. It will be laser engraved powder coat. So it should be scratch resistant and look sharp for years. As I get only one made, it would be cheaper to share the cost if others were interesting in getting one too. I have the logo artwork from the Mooney factory. Not looking to make a profit here. Just want to spread the offer to others that may need a facelift on their pre-J model. I’d suspect that parts would be about $40 each or less. Sent from my iPhone using Tapatalk I’m in, just let me knowSent from my iPad using Tapatalk Quote
M20C_AV8R Posted December 29, 2017 Report Posted December 29, 2017 I would definitely be interested, count me in if you run a batch. Quote
MARZ Posted December 29, 2017 Report Posted December 29, 2017 Try here - https://aero-stuff.com/mooney-yoke-airacraft-decalsticker-1-516039039h-x-4039039w-p-6349.html Re read - yep the powder coat would be superior!! count me in for one.. Quote
TheTurtle Posted December 29, 2017 Report Posted December 29, 2017 (edited) I still have some of the ones from the thread above. Yours for the cost of shipping and a padded envelope.. When I run out of the ones I had made on the first run I'll probably charge $20 plus shipping in the future. Edited December 29, 2017 by TheTurtle 1 Quote
N5937Q Posted January 1, 2018 Report Posted January 1, 2018 I’m going to have a shop make a new badge for my co-pilot yoke. It will be laser engraved powder coat. So it should be scratch resistant and look sharp for years. As I get only one made, it would be cheaper to share the cost if others were interesting in getting one too. I have the logo artwork from the Mooney factory. Not looking to make a profit here. Just want to spread the offer to others that may need a facelift on their pre-J model. I’d suspect that parts would be about $40 each or less. Sent from my iPhone using Tapatalk Sent from my iPad using Tapatalk Quote
N5937Q Posted January 1, 2018 Report Posted January 1, 2018 I’m in, just let me knowSent from my iPad using Tapatalk I need one badly, mine has sharp corners peeling up.. Please keep me informed. Thank youSent from my iPad using Tapatalk Quote
Bart Chilcott Posted January 1, 2018 Report Posted January 1, 2018 I’m in for a laser/ powder coated one. Please count me in. My 65 E had gold accents rather than silver but nearly all of the logo is gone. I wonder why some were silver and some gold? Quote
Bart Chilcott Posted January 3, 2018 Report Posted January 3, 2018 3 hours ago, David Herman said: You just had to show off that beautiful panel ... didn’t you? LOL, YES, and that completely blank right yoke badge! Ha ha ha Quote
Bart Chilcott Posted January 3, 2018 Report Posted January 3, 2018 Thank you very much. I love flying behind it. It also has synthetic on both the PFD and MFD as well as Avidyne active traffic (TCAS) on the MFD. GPSS with the 430W and a STEC30 auto Pilot. It’s all I’ll ever want although I’d love to upgrade the 430W to a GTN650. Quote
LANCECASPER Posted January 3, 2018 Report Posted January 3, 2018 25 minutes ago, Whiskey Charlie said: Thank you very much. I love flying behind it. It also has synthetic on both the PFD and MFD as well as Avidyne active traffic (TCAS) on the MFD. GPSS with the 430W and a STEC30 auto Pilot. It’s all I’ll ever want although I’d love to upgrade the 430W to a GTN650. Rather than the 650, for a few hundred dollars I'd swap out the Garmin 496 for a Garmin Aera 660. The panel dock for it is the exact same dimensions as the 496. You would get a bigger screen than the 650, touchscreen like the 650, synthetic vision, etc, etc. http://youtu.be/zV4BcAynkGI It's a lot of fun spending other people's money . . lol. Quote
Bart Chilcott Posted January 3, 2018 Report Posted January 3, 2018 I would do that in a heart beat! I love the 660! My only reservation is that I use the 496 strictly for Sirius XM stereo in the head sets and the 660 isn’t capable of that. Quote
LANCECASPER Posted January 3, 2018 Report Posted January 3, 2018 1 hour ago, Whiskey Charlie said: I would do that in a heart beat! I love the 660! My only reservation is that I use the 496 strictly for Sirius XM stereo in the head sets and the 660 isn’t capable of that. You'd need a Garmin GDL 51 or 52 to do that. Quote
N6758N Posted March 9, 2018 Report Posted March 9, 2018 (edited) On 12/29/2017 at 2:49 PM, TheTurtle said: I still have some of the ones from the thread above. Yours for the cost of shipping and a padded envelope.. When I run out of the ones I had made on the first run I'll probably charge $20 plus shipping in the future. I'm looking for one now as I just had my yokes powdercoated, anyone have 1 left? Thanks! @TheTurtle Edited March 10, 2018 by N6758N Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.