dtoelke Posted December 17, 2015 Report Posted December 17, 2015 I sent my DG in for an overhaul and when I got it back and installed, the autopilot tracks a couple of degrees left of the heading bug. Everything else appears to be functioning properly and the error is consistent. Anybody experienced this issue before? Does something in the DG or AP need to be calibrated after an O/H? Quote
N201MKTurbo Posted December 17, 2015 Report Posted December 17, 2015 I know the CII has an adjustment for that, I Assume the C41 has an adjustment for it. Quote
Piloto Posted December 18, 2015 Report Posted December 18, 2015 On my Century 31 there are three holes just below the bezel for adjusting the roll limits and HDG bug centering while in flight. Check with the AP maintenance manual for the location of these adjustment. José Quote
peevee Posted December 18, 2015 Report Posted December 18, 2015 Ours does the same. Our avionics guy said it just has to be adjusted in flight, I just haven't had the time to hook up with him to have it done. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.