Pstone

Hi Jerry, I know where there is one sitting. Wolf Airpark Manvel Texas. I need a propeller for a 1962 M20C (McCauley B2D34C53-AMNO) cracked hub. Thanks, Pat

Important note: 90 inch pounds is 7.5 foot pounds

I have used this connected to my air compressor with a hose dipped into a gallon of Corrosion X for 20 years. Pat Milton 1_4_ Siphon Spray Blow Gun -.pdf

Hi Jerry, I hate to see these scrapped. How big a truck would I need to transport? 1/2 ton pickup. Uhaul truck? Thank you, Pat

Don Maxwell has received a shipment of intake boots.

Hi Dominik, If the KX170B works, I want it. (just for insurance) Pat Stone KEFD

If you are going to clean up threads, use a thread-chaser. A tap cuts in new threads, thread-chaser cleans up the current threads. Pat

One day a friend on mine's widow called and said she would like to go flying on Sunday afternoon after church. I said sure and we we up, she then asked if I could spread Fred's ashes. As I was spreading the ashes, a shadow appeared flying in formation. You could even see the Mooney tail. Fred flew a Mooney as well. I said to my friend's widow, Fred has decided to join us on this last flight. It was really something. Attached is a picture. Pat PS. When spreading ashes, put your hand out of the window with the bag (small) of ashes, let it go in the windstream. Fred's Ashes.pdf

For transitioning from a Tiger to a Mooney, start with a M20D.

If my temps are higher than I like in climb, I pitch for 120 mph. On a really hot day, 130mph.

If old doors are $2,000.00 and new doors are $2,500.00 I would like to buy the new doors in exchange for my old doors + $500.00 Pat

Hi David, I really like the side windows. How did you do that? Did you need a 337 etc.? Thanks, Pat

Yoke decals are $.50 @ Wag-aero.

HOOKER HARNESS

Hi Bob, How much for the suction gauge? Thanks, Pat

I have an extra J spinner, no back plate. Don't know if it will fits yours. Thanks,

On C Model 1852, that scat goes to the generator. On the back end of the generator, there was a cover with a scat hose mount. If you have converted to an alternator, you have an extra scat. Thanks,

Hi Warren, I have that prop on my C. This propeller was purchased in 1986. I looked in the original log book. The original propeller was also 2D34C53A. This was the original prop on the C model prototype in 1962. Pat

JD in Smithville, Texas has one. (SWTA)