Empennage attachment part numbers?

[afward]

I think I need some help; We’ve found that the copilot side horizontal stabilizer has nearly out of limits movement up and down. My IA thinks it’s the bushing in the upper attachment on that side. Looking at the ipc (67 M20F) there’s hardware labeled as 1, but no bushing. What do we need to be looking for? Any ideas?

 

 

Sent from my iPhone using Tapatalk

[PT20J]

Good idea to try the bolts first. Make sure you use the right ones - they are close tolerance bolts.

[Guest]

22 hours ago, afward said:

 

I think I need some help; We’ve found that the copilot side horizontal stabilizer has nearly out of limits movement up and down. My IA thinks it’s the bushing in the upper attachment on that side. Looking at the ipc (67 M20F) there’s hardware labeled as 1, but no bushing. What do we need to be looking for? Any ideas?

 

 

Sent from my iPhone using Tapatalk

 

I would be surprised if it’s the bushing, which are chrome plated, the hole in the aluminum fitting is more likely to be worn.  The only way to know is removing the tail group and measure the holes and the bushings.

[afward]

Ok, we’re going to try the bolt first. If that doesn’t work, I guess we’ll have to check the fitting and bushing… Hopefully it’s just the bolt!

Thanks for the advice everyone!


Sent from my iPhone using Tapatalk

[Guest]

From the IPC