Jpravi8tor Posted June 26, 2022 Report Posted June 26, 2022 My oil temp transducer is intermittent, my center stud turns I'm pretty sure it"s not supposed to do that. Damndest thing can't find anything in my engine IPC or my airframe ipc?!?!? A. what's the p/n? B. who's got one? Quote
jetdriven Posted June 26, 2022 Report Posted June 26, 2022 It’s this. Don’t forget the an900 gasket that goes under it which is in the Lycoming IPC https://www.aircraftspruce.com/catalog/inpages/rochoiltemp.php?clickkey=14962 Quote
Guest Posted June 26, 2022 Report Posted June 26, 2022 8 minutes ago, Jpravi8tor said: My oil temp transducer is intermittent, my center stud turns I'm pretty sure it"s not supposed to do that. Damndest thing can't find anything in my engine IPC or my airframe ipc?!?!? A. what's the p/n? B. who's got one? The part number is found in the wiring diagram not the IPC. Clarence Quote
Guest Posted June 26, 2022 Report Posted June 26, 2022 2 hours ago, jetdriven said: It’s this. Don’t forget the an900 gasket that goes under it which is in the Lycoming IPC https://www.aircraftspruce.com/catalog/inpages/rochoiltemp.php?clickkey=14962 The Rochester thermocouple in your link requires a special Rochester solid copper gasket not the AN900 or MS35769 series. Clarence Quote
Jpravi8tor Posted June 27, 2022 Author Report Posted June 27, 2022 Thanks to all, wiring diagram for parts who would have thought? Quote
carusoam Posted June 27, 2022 Report Posted June 27, 2022 4 hours ago, Jpravi8tor said: Thanks to all, wiring diagram for parts who would have thought? Think way back on how things have improved and standardized over the decades… Unfortunately, our documents are stuck in time… Some things are stuck in a time when wiring drawings were done using a pencil…. Which includes most of the 1970s…. So much detail is included after the computer was introduced to modern society… Best regards, -a- Quote
Fly Boomer Posted June 27, 2022 Report Posted June 27, 2022 6 hours ago, carusoam said: So much detail is included after the computer was introduced to modern society… It is certainly remarkable -- both for text documentation and drawings. With software readily available for documentation, updates or even new models can use the old "drawing" as a starter instead of starting over or erasing and redrawing. With proper catalogs and backups, the computer has improved institutional memory. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.