Ned Gravel Posted May 1, 2022 Report Posted May 1, 2022 Since I got the Mini 6 to replace my Mini 4 (that was having trouble keeping up with things), I had to find a way to mount it back to my yoke. Mini 6 is thicker than Mini 4 so I had to invest in some new Ram mounting hardware - and I made some mistakes. In essence, I bought almost two separate systems, when all I had to do was wait for Ram to bring back the same holder as before, but for the Mini 6. I had wanted to buy one that allowed the Mini 6 to be used with its soft rubber cover (in order to prevent stressing the screen whenever I removed it from my office cover to use in the aircraft. Turns out, this is a waste of time because the thicker form of the Mini 6 does not bend at all compared to the Mini 4. Result is I have these parts for sale. Original cost to me, excluding shipping, was over $200.00 USD. See the cost of new parts for yourself at https://www.rammount.com/. I am looking for $100.00 plus shipping for anyone who wants it. If it has not sold in 2 weeks, I will probably give them away to our local flying club to give to new underprivileged (:)) student pilots looking for similar gear for themselves. E-mail me at egravel03@rogers.com See the photos and captions below. The plate shown below is not included. This is the mount I finally used to replace the one shown above.
Unit74 Posted May 4, 2022 Report Posted May 4, 2022 Pivot has Mini 6 cases. I’m holding it my hand right now. GLWS.
Recommended Posts