AerostarDriver Posted March 27, 2021 Report Posted March 27, 2021 I unfortunately need to remove and replace my Stall Switch... I am looking at the inspection panel and the control rod between the hole and the Stall Switch, I am at a total loss for how to even access it. I am open to any ideas or suggestions as to how remove and replace. I also am open to any ideas that would allow me to fix it in place but it does not appear that is possible. The failure I am having is that I can hear the micro switch make contact but the electrical contact is intermittent, I already went through the rest of the warning system and replaced the horn, the old one was working fine but was not the correct part number.
carusoam Posted March 27, 2021 Report Posted March 27, 2021 There are a few threads that cover the issue from older planes to Fiki planes... The FIKI guys have a heated switch that wears and tears... and sees a fair amount of replacement... https://mooneyspace.com/search/?q="Stall switch"&updated_after=any&sortby=relevancy Best regards, -a-
Raymond J1 Posted March 27, 2021 Report Posted March 27, 2021 (edited) Would you like to know how to deposit this part ? Edited March 27, 2021 by Raymond J
.thumb.jpg.44bc5ad17b44ec09b48bdca2a82f7a76.jpg)
Recommended Posts