How to fix this?

[ragedracer1977]

The glass face is loose or broken on the manifold/fuel pressure gauge.  

Is this something I can easily fix?

VID_20170609_173250.mp4

[N201MKTurbo]

The best thing would be to remove the gauge and take it to Flite Instruments at CHD they can reseal it. 

Make sure you put a wrench on the blue AN fittings when you loosen the B nuts on the hoses or you will twist the fittings in the instrument.

 

[sleepingsquirrel]

Suction cup on glass and a little superglue for a temporary fix.

disclaimer:

I disavow any suggestion that may be inferred from this post

[ragedracer1977]

1 hour ago, N201MKTurbo said:

The best thing would be to remove the gauge and take it to Flite Instruments at CHD they can reseal it. 

Make sure you put a wrench on the blue AN fittings when you loosen the B nuts on the hoses or you will twist the fittings in the instrument.

 

I'll call you in a little while.  

[ragedracer1977]

1 hour ago, sleepingsquirrel said:

Suction cup on glass and a little superglue for a temporary fix.

disclaimer:

I disavow any suggestion that may be inferred from this post

Ha!  That's exactly the plan I came up with in my head if I *had* to make it work for a short time.

[Yetti]

Super glue and glass not so much. Silicone/ Shoe goo would stick better.  Use some toothpicks bamboo skewers for apllication