AGL Aviation

Yes, we have. Parts that have to be manufactured will of course take their time... we have one order in for that [emoji51] Here’s hoping for the best possible outcome for those. Parts that are on their shelf (in stock) are going out the door, payment before they get to the shipping docks. Sent from my iPhone using Tapatalk Pro

The STC for the Electroair switch (SA04032CH) does not specify that it may only be used in conjunction with another ignition system neither does the installation instructions and is issued to the airframe (nothing about the engine). The STC for Surefly installs with the Bendix turn switch. It’s kind of a grey area in our opinion, falling under overlapping and interfering STC’s. Sent from my iPhone using Tapatalk Pro

This looks like the switch that can come with the Electroair conversion. The Surefly instructions use the existing Bendix switch. Sent from my iPhone using Tapatalk Pro

It sure is! See you in a few! Sent from my iPhone using Tapatalk Pro

Yes, it’d be much easier. I should’ve specified that [emoji846] Not enough coffee today Sent from my iPhone using Tapatalk Pro

Yes, it’s disabled. Removal is an option according to instructions. Bob’s still remains intact (just disconnected) mostly because it seems to be the first thing they bolt to the back side of the firewall... very labor intensive to remove it. Sent from my iPhone using Tapatalk Pro

It works just like it did before. When you push the switch it grounds the right magneto and engages the starter motor. The left mag is replaced on the shower of sparks. There is no permission granted in the STC to alter the switch configuration. The SIM is designed to work with whatever original switch each model has. Sent from my iPhone using Tapatalk Pro

Tell your ‘friend’ we’re looking forward to seeing him again [emoji16] Sent from my iPhone using Tapatalk Pro

4-5 hours total - this last install made #4 under Lynn’s belt. So, not bad. Sent from my iPhone using Tapatalk Pro

Hopefully, these will do for you guys. On the next install I’ll take some progress photos through the installation progress. Sent from my iPhone using Tapatalk Pro

Do you mind, Jon? Sent from my iPhone using Tapatalk Pro

Yes sir!!! [emoji846] Installation went smoothly Sent from my iPhone using Tapatalk Pro

You’re more than welcome to call Lynn at the shop to discuss your plane and the install. As Bob stated, it’s a simple install. Lynn just installed another one today. Sent from my iPhone using Tapatalk Pro

Yes, they do. You’re likely to get what you need for a lesser cost. Sent from my iPhone using Tapatalk Pro

You could try Aerospace Welding (AWI). We typically use them or Dawley Sent from my iPhone using Tapatalk Pro

Give us a call 828-391-8645, shoot me a text 828-216-5955, or send me an email tamara@aglaviation.com Let's see what we can get done for you, even it it's just advice

Bob Belville is correct - our flat rate for an M20 is $1840. A K is a little more. You’re more than welcome to call us and talk to Lynn about everything he checks and completes in an annual (828-391-8645). If you’re paying $4000 for an annual with no big maintenance issues attached to it, our perspective is that is too much. Sent from my iPhone using Tapatalk Pro

They are still there. Um, a little short handed in the parts dept (I think only two or so people working at the moment). If you’re a MSC (or have your MSC) shoot an email to check up. Sent from my iPhone using Tapatalk Pro

You can use the toaster oven at work that we use to heat parts rather than mama’s oven. Nancy will love you for it later Sent from my iPhone using Tapatalk Pro

I’ll call Mooney tomorrow (if they’re open) and see what they have to offer Sent from my iPhone using Tapatalk Pro

Hope you guys had a FANTASTIC weekend and end to March! Happy 1st of April and all April fools ASIDE, we're coming to you to let you know we will not be offering a % off this year! But, do not fear or lose heart! Right on the heels of that we are going to offer an AMAZING perk! We know annual time isn't a good time for most of you. We want to bring some joy back into those couple of days that your plane is down. We know that a hindrance of bringing your Mooney to us is all the arrangements that have to be made along with it. Starting May 1st and ending December 31st - we have an offer for every one of our traveling Mooney customers! We will cover a 2 day stay at the below linked cabin and provide you with transportation (a courtesy car) to use those 2 days! Turn your annual into a couple day vacation (bring your family if you'd like). Another great perk of this location is it is located directly behind the home of Lynn and Tamara Mace. *Please use their calendar through the link to determine the availability of the cabin. Please do not book through their site, firmly schedule with us and we'll take care of the booking. **If something happens and your annual takes longer than 2 days ( at no fault of AGL) you'll be responsible for additional days if available. https://www.airbnb.com/rooms/16635667?location=Morganton%2C%20NC%2C%20United%20States&guests=1&adults=1&s=11rpI9Qm&fbclid=IwAR1IfxgAlMcX5rA9UY60TqFwxYpvwfZV6p40agWbI6UYzO5ft2hzQDAF6Vw

Yes, you can. As a matter of fact I’m doing so right now for a customer. Get the number off of the key along with: n-number, model, and s/n of the plane. They then can contact parts at Mooney (Steve Rue) to place the order. Send me a text (828-216-5955) or email me tamara@aglaviation.com with the above information, I don’t mind to sell them to you and have them shipped right to you. Sent from my iPhone using Tapatalk Pro

Well then... alrighty. Sent from my iPhone using Tapatalk Pro

Bob... you know Lynn’s “gutter” trick... get him to whip you up one out of scraps in the back [emoji16] And I’ll bring your jacket and have Lynn put it in your hanger Monday [emoji846] Sent from my iPhone using Tapatalk Pro

Being a MSC in name only doesn’t make you a better Mooney mechanic for sure. Experience and proper training/education is what really makes the difference. Sent from my iPhone using Tapatalk Pro