bavareze Posted June 3 Report Posted June 3 Hello! What are my options making this look prettier? I saw some people have an aluminum trim with embossed markings, that would be nice to have. Or anything else that's a bit prettier. Thanks! Quote
47U Posted June 3 Report Posted June 3 28 minutes ago, bavareze said: What are my options making this look prettier? I’ve entertained removing the royalite overlay altogether, painting the underlying aluminum flat black (or whatever color you desire) and printing labels for the switches, controls, etc. The anodized panels Mooney installed on later years may work out, maybe not. This issue is eating away at me, too. I should have done ‘something’ when I had the engine control cables replaced a couple years ago, as the rest of the switches and cable controls would need to be removed in order to do a ‘decent’ job. Sorry, I’m not much help, just commiserating with you on a common problem. I’d be interested to hear of better solutions, other than a total left/right instrument panel replacement. But, that might be what it takes to do it right. Quote
Pinecone Posted June 4 Report Posted June 4 There are some shops that make custom panels. Normally for full panels, but they should be able to do that piece. Normally, the draft the piece, the CNC route the panel. Then they powder coat is in the color of the text (white for my panel), then powder coat with the overall color. Then they laser etch the top layer for the text, so the underlying color shows through. Finally, they powder coat with matte clear. Quote
LANCECASPER Posted June 4 Report Posted June 4 On 6/2/2024 at 11:00 PM, bavareze said: Hello! What are my options making this look prettier? I saw some people have an aluminum trim with embossed markings, that would be nice to have. Or anything else that's a bit prettier. Thanks! Call Matt at https://engravers.net/acproducts.html. I bet they could make you something that would look great. Quote
TaildraggerPilot Posted June 5 Report Posted June 5 Any company that makes custom complete panels should be able to make any partial piece. They also can laser engrave all the placards and markings. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.