Nic_S Posted January 24, 2021 Report Posted January 24, 2021 Recently had Dual G5's and a GNC 355 installed, but haven't been able to locate the STEC DWG #0570 that depicts the reconfig of the STEC-30 to accept he DC inputs. Does anyone have the Drawing and willing to share? Quote
Andy95W Posted January 24, 2021 Report Posted January 24, 2021 I had a similar issue last summer, same setup except I have an STEC-50 (very similar autopilot). STEC said those drawings were proprietary, and would only share them with a dealer/service provider. I drove my autopilot to the closest dealer. $110 and took about 45 minutes. Quote
Nic_S Posted January 25, 2021 Author Report Posted January 25, 2021 That is what I have read, I seen a few people had the drawings on the Beechcraft sight but haven't heard anything. I believe my mechanic is coordinating something with a local Stec dealer this week. Hopefuly have my bird back this week! Quote
Andy95W Posted January 25, 2021 Report Posted January 25, 2021 You’re gonna love it! Everything works better now that the STEC is getting a clean, digital signal for heading and GPSS. And the GPS/GPSS combination is so slick it will fly holding patterns and entries with ease. (Others here will say this is actually pretty old technology- but it’s new to me in my old Mooney!) 3 Quote
Nic_S Posted January 25, 2021 Author Report Posted January 25, 2021 I look forward to it! I was limited as my home base only has RNAV, could leave IFR but couldn't return. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.