Sean S Posted March 30, 2019 Report Posted March 30, 2019 Hi all, looking for minimum 4 EA PN 22NKA38-02 nut plate for fuel panel. I the photo with two, I need the top one. They go on the small fuel tank access panel, 1975 F. @Alan Fox @acpartswhse Quote
Marauder Posted March 30, 2019 Report Posted March 30, 2019 Hi all, looking for minimum 4 EA PN 22NKA38-02 nut plate for fuel panel. I the photo with two, I need the top one. They go on the small fuel tank access panel, 1975 F. [mention=7207]Alan Fox[/mention] [mention=12721]acpartswhse[/mention] I have a 75 F. Where exactly does this go? I’ve never seen one before. Sent from my iPhone using Tapatalk Pro Quote
7.Mooney.Driver.0 Posted March 30, 2019 Report Posted March 30, 2019 I replaced mine with those Sent from my iPhone using Tapatalk Quote
Aerodon Posted March 30, 2019 Report Posted March 30, 2019 Clickbond make these for fuel tanks. Epoxy into place. Quote
Sean S Posted March 30, 2019 Author Report Posted March 30, 2019 The Domed nut will not fit the outboard panel as it is dimpled. Quote
Sean S Posted March 30, 2019 Author Report Posted March 30, 2019 Sent from my iPhone using Tapatalk Quote
67 m20F chump Posted March 30, 2019 Report Posted March 30, 2019 My cover is flat. I don’t have the countersink that your plane has mine is a 67’. I’m doing the same project on my plane. It has the same red stuff in the nutplate. Quote
67 m20F chump Posted March 30, 2019 Report Posted March 30, 2019 Went out to double check. Definitely flat. The countersink is on the flange to skin and it is drilled. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.