Bendix/King HSI in panel

[dcrogers11]

Does anyone have a picture of their panel with a B/K HSI mounted in it.  I was also curious if there is going to be space issues with the AI just above it?

 

Thanks,

Don

[FlyDave]

Here's a couple from my newly re-arranged panel. The HSI has some glare on it but you get the idea...

 

 

 

 

 

 

[dcrogers11]

Thanks, I have a 64 C and the panel is a bit smaller and was concerned that i would not have enough room to center the HSI and AI over the yoke.  

[Rwsavory]

Here is the HSI in our 65 C for comparison. Having it side-by-side with the AI works out fine for us.

[Marauder]

Here's a couple from my newly re-arranged panel. The HSI has some glare on it but you get the idea...

Factory CHT broke?

[dcrogers11]

Here is the HSI in our 65 C for comparison. Having it side-by-side with the AI works out fine for us.

Thanks, I've not even thought about the side by side setup but it looks good in your panel. 

Don

[Rwsavory]

Thanks, I've not even thought about the side by side setup but it looks good in your panel. 

Don

Thanks. It's not the best arrangement, but it works. One of the previous owners put in a lot of stuff, including an Argus where our VS/ALT unit is now. 10 pounds in a 5 pound bag, so to speak. I'm guessing there some space issues behind the panel that drove this placement.