Nukemzzz Posted May 22, 2025 Report Posted May 22, 2025 Sold on eBay in a couple of days actually... the buyer was quite excited by the deal! If you or a buddy has a J that wants to save some money on the GNC-500 install I have the install kit. My local avionics shop had a leftover full autopilot system for the J from a cancelled install (Gear up landing before the appointment). I purchased the full system (2 Axis + Trim) and I'm using the Servos, Head Unit, and Yoke Buttons in my new Cherokee 6. I'm looking to sell the J Model install kit that remains (Retails for $4195). See the attached kit install bill of materials. I have everything in the Base and Pitch Trim Columns except for the GA-28 servos which aren't part of a the install kits. According to my Garmin Avionics shop the Mooney M20J kits are priced at the following: The roll/pitch install kit (K11-00024-25) list price is $2935.00 The trim install kit (K11-00024-26) list price is $1260.00 Or $4195 combined I'll let them go for, $1,500 for Roll Pitch Kit $800 for the Pitch Trim Kit 1
Nukemzzz Posted December 13, 2025 Author Report Posted December 13, 2025 Bump, I still have this available.
LANCECASPER Posted December 15, 2025 Report Posted December 15, 2025 On 5/21/2025 at 10:03 PM, Nukemzzz said: If you or a buddy has a J that wants to save some money on the GNC-500 install I have the install kit. FYI - Garmin GNC is a Garmin Nav Com. There is no GNC500 Nav Com, but there is a GNC355 Nav Com. Garmin GFC is a Garmin Flight Control System. (Autopilot). Garmin has a GFC500 Autopilot.
Recommended Posts