AJ88V Posted October 16 Report Share Posted October 16 Anybody running ForeFlight on their iPhone for their "primary" (VFR) navigation? I have barely flown twice with my iPad Mini 6 mounted on the yoke, but already I'm not liking how much of the panel it obscures compared to my old Lowrance Airmap 500 (which, BTW, was adequate to take me to both the East and West Coasts, as well as north to Maine and south to Florida). Thinking maybe running on an iPhone 16 or 16 plus and mounting the Mini as a kneeboard. For comparison Mini 6: 8.3" diagonal, external 5.3" x 7.7" iPhone 16: 6.1" diagonal, external 2.8" x 5.8" iPhone 16 plus 6.7" diagonal, external 3.1" x 6.3" Airmap 500 (for grins) 3"? diagonal, external 2.5" x 5.6" Your experience? Quote Link to comment Share on other sites More sharing options...
BlueSky247 Posted October 16 Report Share Posted October 16 I believe @LANCECASPER just recently upgraded to the latest, biggest iphone screen version and likes it on a yoke mount. Quote Link to comment Share on other sites More sharing options...
Rick Junkin Posted October 16 Report Share Posted October 16 1 hour ago, AJ88V said: Thinking maybe running on an iPhone 16 or 16 plus and mounting the Mini as a kneeboard. Are you set on a yoke mount? I started using a MyGoFlight suction mount on the side window for my iPhone, replacing my yoke mount iPad Mini 6, and I really like it. I have an iPhone 14 Pro which is the same size as the base 16. I use it as my primary Foreflight device both in and out of the cockpit. When I replace the 14 Pro I will get the 16 Max for the readability of the larger screen. I keep the iPad Mini in the side map pocket for POH and avionics pilot guide reference. The iPhone holder swivels easily to go from portrait to landscape and I may be able to use the 16 Max for doc reference if the screen is readable enough and not need the iPad except for backup. Here's a pic of the MyGoFlight mount with the iPhone holder. This is the standard size articulating mount. They also make one with shorter arms, which I have now, and it works even better in the limited space I have available. Quote Link to comment Share on other sites More sharing options...
McMooney Posted October 16 Report Share Posted October 16 (edited) My Mini is mounted up high on the center bar, up near the ceiling, only thing it blocks is the unreadable thermometer. how do you have it mounted, mine isn't any bigger than the yoke. Edited October 16 by McMooney Quote Link to comment Share on other sites More sharing options...
Pinecone Posted October 16 Report Share Posted October 16 Mine is fine on the yoke, without blocking anything. I have it mounted with RAM bits, and it is somewhat flat, so when I look down, it is perpendicular to my line of sight. I will try to remember to take some pictures tomorrow. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.